Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 5, 2026
@old_scientist i dont but i want to be able to reasonbly replicate what an installer will produce so i can unserstand any proposals.
@andrewj we already have a 6kw inverter, 8.55kw of south facing panels, and 16.12 kw of signergy batteries. i am pretty sure its not cost effective to...
Just discovered a major flaw... been using the 99% temperature, not the 99.6!!!!! So instead of a -3 design temp, it should be -6.1. i have attached m...
Thank you all, i have made several adjustments based upon the advice given including bridging and going with the new MCs figure of 0.5 ACH. Also had a...
@rob-of-york Thanks, my gas useage does include the gas hob, and the hot water combi boiler, but i think leaving them in should be fine.
@rob-of-york Thank you for that, whilst familiar with the concept of bridging in terms of damp, never thought of it in terms of heating. i have been o...
@editor Thanks Mars, I have been enjoying playing with the formulae, gives me something to do on long night shifts. i actually really enjoying doing t...
@old_scientist i had a look at this, all my gas consumption for New Years Eve was 85kw. Thats the highest day for two years. Winters have been mild th...
@jamespa Also this coming winter I am going to run my combi system at as low as it will modulate and see how we get on.
@jamespa Hi James, the living/kitchen/dining room is around 40% of the property. My annual gas usage is 9300kw, of which i am estimating 170kw a month...
I used this heat loss calculator based on my worse day which was 85kw of gas, on a -3 day at 22 degrees. Temerature on the day in question was -3 unti...
- 27 Forums
- 2,767 Topics
- 65.1 K Posts
- 932 Online
- 7,169 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Siting of the external sensor on a heatpump
My Octopus electrician (part of the installer team) not...
By Jancold , 21 minutes ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 22 minutes ago
-
RE: Is it the house or the equipment?
@springswood We have two Daikin single split A2A syst...
By Rob of York , 1 hour ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
You should (almost) always reject having a buffer, by w...
By JamesPa , 1 day ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 1 day ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 1 day ago
-
Sorry to hear about the problems, its going to be somet...
By JamesPa , 1 day ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 2 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 2 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 2 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 3 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 3 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 4 days ago



