Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jul 25, 2024
Interestingly, I've been checking this site out after it was posted here. Some of the results others are getting from the same install I'll be getting...
@allyfish Hi there! Thanks so much for your input and sharing your experience. How do you heat your house now? Twice daily, morning and evenin...
The CoP of 2.9 is closer to what you would get at -3 and 45 flow temp. Most the time it's nearer 7 degs and your flow temp came down to 35 the CoP wou...
Also guys, I just wanted to say how helpful and thorough you have been. Its very much appreciated. 😉
If you have only used 10350kWh of oil, your heat input required cannot be 23000kWh. Other your boiler is 200% efficient, not 70%. Which makes no sense...
In all fairness, I never have my hot water on given I have an electric shower. For other sink and kitchen hot water use, given it's a combi I just t...
Sorry about that this is the data. Regarding oil, if my demand was 14000khw based on above figure I've already shared then : 14000kwh / 0.7% (70% ...
Morning guys! Thanks so much for this. Very interesting. @bontwoody Here are the complete stats given to me. (see attached) Regarding the pessim...
@bontwoody & @judith It seems you both have a nice system setup! if only i had a decent solar array then this whole ASHP would be a no braine...
7Kw x 500 for Hot water = 3000Kwh 3500 not 3000
Hi guys! Thanks for getting back to me so quickly. @johnmo Aye, thank you. I am not too concerned about the brands but rather thought it an idea j...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
Volumisers are normally plumbed so that they are in the...
By JamesPa , 3 hours ago
-
@toodles possibly. The £9k labour charge for 4-5 days w...
By AndrewJ , 7 hours ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 11 hours ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 1 day ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 1 day ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 1 day ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 1 day ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 5 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 5 days ago
SPONSORS
