Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 9, 2026
FWIW the ramp with my Vaillant up occurs shortly after the cloud of vapour appears, so its during the 'recovery' phase. I have always assumed that th...
Agreed Agreed, an essential part of setting up a WC curve correctly I don't agree with this unless you want your rooms to be at 16. Assumin...
There is a thread from a year ago where this was debated at length and the conclusion, well argued imho, was flow is better but it's likely only to ma...
Yes it does, but you can disable it. Sensocomfort-Settings-Installer Level-Installation Configuration-Circuit 1-Room temp mod. Set to inactive to ru...
Check them. Filters, particularly the fine mesh filter if you have one (it may be inside the case) block up quickly. Mine blocked up to the point th...
Thanks for the info. Volumiser configuration should be OK, a little concerned the rads are original it suggests some may be undersized. OK, difficu...
As you now have a Heliotherm engineer on the case I wont comment further. As @mars says this is high end stuff, the suppliers need to be made to work...
OK. Well in case you haven't already the first thing to do is to disable all room influence and turn the WC curve down as far as you can until the ho...
The larger house might turn out slightly more efficient due to increased system volume, but I'm basically on the same page as @majordennisbloodnok.
@davidb I'm presuming you are already running open loop 24*7, no external controls and have turned the weather curve down as far as possible consis...
@f1p OK noted Without further information about the system I cant really comment with any certainty, all I can do is cite generic statements ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: PV and battery long payback - sense check query
If you look at the line just below the “Add reply” butt...
By Majordennisbloodnok , 52 minutes ago
-
RE: HomeTherma Is Live: A New Home-Energy Platform Built Around the Homeowner
Signed up!
By bobflux , 8 hours ago
-
RE: Electricity price predictions
In our case, we constrain the charging level etc using ...
By Batpred , 8 hours ago
-
Does minimum system volume matter in the context of sim...
By Tony.Stolz , 1 day ago
-
RE: Indevolt Batteries UK Support & Info Thread
I had a quick look and they are a little vague. They ...
By BlizzardGreen , 1 day ago
-
RE: Has anyone seen this problem before? Huge anticycling times
Oh dear. Glad it was replaced. I have been mighty imp...
By JamesPa , 1 day ago
-
RE: Can I start an argument about buffer tanks please? 🙂
Dont, just adjust the LSVs to get different temperature...
By JamesPa , 2 days ago
-
RE: Heat pump running costs – what has actually worked for you?
I installed the air source heat pump in January 2026, i...
By bobflux , 2 days ago
-
RE: Grant Aerona Air to Water R290 6.5 kW - Quiet Mark and Silent Running
Thats all interesting. DHW on my Vailant seems to respe...
By JamesPa , 2 days ago
-
RE: Do I need to change the control unit when replacing my Ecodan Air Source Heat Pump
One of the other mods has just reminded me that @ashp-b...
By Majordennisbloodnok , 2 days ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: adrian Manufacturer: Appliandirect.co....
By Adrian , 4 days ago
SPONSORS
