Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Apr 14, 2025
I was browsing older threads and found this, seeing as it is the quite holiday time between holidays and it is horribly wet and windy out there, I hav...
I have an infrared thermometer gun thing myself, and have found it fairly reliable. if comparing readings from different places you do need to make s...
That is interesting to know, I should try and check our pump speed, but our system is pretty quiet in operation, aside from the general heat pump nois...
Hopefully so. I should have mentioned that our one is also a Samsung Gen 6, so I don't think there will be many differences even if slightly differen...
WElcome to the forum. My first post was eaten by some gremlin, so I am trying to reproduce it here. Firstly, we need some information about the sys...
According to my installation manual for 12kW unit, AE RXYDEG/ AE RXYDGG, the minimum requred water flow rate for operations is 16l/ min. I can't ...
I think that would depend on how quickly your house lost heat and what the hysteresis of the thermostat is, but given the way our one has improved in ...
Also for comparison we have a 12kW system and at the weekend with -4C at night and 0 to +2 in the day we used about 34kWhr on the heating and hot wate...
Hello LostInSpace. I'm also fairly new to this but will attempt the usual introductory run down of necessary information. For starters, what contro...
Your radiators are very hot to touch? Are you sure your weather compensation is set correctly? Our is about 30 at 15C to 45 at +2, and the radiators...
@abernyte Biggar, where there are many iffy mobile signals due to the strange siting of the local masts plus ups and downs in terrain.
@petra Ah,that sounds like a more sensible way to set things up than my system.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you are considering phasing the project, then I woul...
By GrahamF , 53 minutes ago
-
RE: Siting of the external sensor on a heatpump
Of course had the heat source been a heat pump it would...
By JamesPa , 3 hours ago
-
Never assume, it makes an ass of u and me! OK, tha...
By JamesPa , 3 hours ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 5 hours ago
-
RE: Is it the house or the equipment?
@springswood We have two Daikin single split A2A syst...
By Rob of York , 6 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 1 day ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 2 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 2 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 2 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 3 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 3 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 4 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 4 days ago
SPONSORS
