Last seen: Aug 13, 2025
This will be linked to specific Octopus tariffs not the heat pump installation, you don't have to be an Octopus customer to have a heat pump installed...
Exactly my point, once wired in to the FTC and appropriate dip switches changed the Ecodan will ignore the main controller and use the Hive to call fo...
The OP's issue is that the house is not being heated when the Hive's are calling for heat this is because they are not wired into the Ecodan, to resol...
Did you have Hive before the heatpump that was connected to a boiler, when the heat pump was installed the existing controls should have been connecte...
@spacebiscuit could you detail what switches you changed maybe useful for someone else in the future thanks
@mikeavison Here is a table of Octopus import and export tariffs you can combine
Having read the doc on agile integration it does actually use the half hour pricing it’s just that the Tesla app can’t display It well. If it were me...
Those prices make sense for today it’s cheap till 4pm which it’s classed as off peak and then expensive from 4 onwards so it’s classed those as peak. ...
In the utility rate plan there is schedule then below that pricing are you saying all the pricing slots are blank? im not on agile so have never use...
Hi The Netzero app can only do what the Tesla app can do. What you are describing is not possible in the Tesla app. Netzero will input the 48 half...
Hi Toodles, Have a look at the Netzero app, you can automate simple powerwall changes through the app. So if you wanted it to charge the batte...
To get into the menus to change settings the system has to shutdown don’t worry it won’t break anything.
- 26 Forums
- 2,378 Topics
- 53.9 K Posts
- 198 Online
- 6,060 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Radiator sizing sanity check
No chance! Largely, hence my suggestion to do some...
By JamesPa , 10 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
As it turns out this is correct! All I needed to do was...
By benson , 10 hours ago
-
Here is an update of the setback we operate on our syst...
By SUNandAIR , 13 hours ago
-
RE: Grant ASHP 17.5 kw. weather curve
@chinkoa Sorry there are two separate thoug...
By JamesPa , 13 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@transparent As easy as putting sparklers in champag...
By Papahuhu , 14 hours ago
-
@f1p Looks good, and will likely be something I use whe...
By Sheriff Fatman , 16 hours ago
-
RE: Cascade 2x Grant Areona 10kw ASHP - Ongoing setup issues
Either complete Bow Locks or at best a marginal effect....
By JamesPa , 19 hours ago
-
Hi all I’m looking to get some insight on what others...
By Renewables345 , 19 hours ago
-
RE: The Great British Heat Pump Owner Persona Survey: Let's Build Our Archetype!
@mosibi, go on then, complete the survey. Let's get the...
By Mars , 20 hours ago
-
RE: Water Hammer After Heat Pump Install
@jaynieq I wish you luck with this one. I think the ma...
By JamesPa , 22 hours ago
-
RE: Optimum new build house design for Heat Pump
From first principles I would say: Definitel...
By JamesPa , 2 days ago
-
RE: Weather compensation- why you should use it
As good a place as any to drop this video:/p>
By Mars , 2 days ago
-
RE: Forum updates, announcements & issues
@transparent D'Oh - I did look before I posted but I mi...
By dr_dongle , 2 days ago
-
Compatibility with Samsung AE080RXYDEH
I am new to all this. We have a SamsungAE080RXYDEH that...
By John999 , 2 days ago
-
RE: New Fogstar 15.5kWh upright solution
@batpred Maybe you should buy your additional batter...
By Bash , 2 days ago
-
RE: Data Accuracy Problem: Daikin 8kW Heat Pump's Onecta App vs MMI Power Consumption
@nursethescreens Yes, comfort and happiness of the fami...
By Toodles , 2 days ago
-
RE: Connecting Growatt SPH5000 over wired ethernet rather than wireless
Thanks folks. I had tried googling an ethernet lab adap...
By z8lccda , 2 days ago
-
RE: Changing from 4-port buffer to volumizer
@toodles I'm not concerned that the behaviour is not no...
By Andy1618 , 2 days ago
-
-
RE: Setback savings - fact or fiction?
I agree, and I think there are two things in play here....
By cathodeRay , 3 days ago


