Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Apr 9, 2025
Some initial observations:- In my opinion (personal experience and speaking to a heat pump engineer) Samsungs like that are a bit rough. Not a Vaillan...
The link would be great if possible please?
I would be very interested to see this too Persephone if at all possible please? I have DM'd you. I also thought that if an actual on-site sound asses...
PS just seen MIS3005-D went out for consultation a few minutes ago.
Hi Mars, I'm very early on! Interested in getting an ASHP but watching the tech as it develops and improves, and the regulations and regulators to s...
@derek-m Haha, this could go on and on past PG to 12 to 15 upwards to 18 by the end of the thread! I will resist the huge temptation to come back with...
Ahh I might be wrong about there being a requirement for AV grommets if the manual says bolt directly to a concrete base. The requirement in MIS3005 i...
I would say always always always mount on thick rubber anti-vibration grommets in any domestic setting. You do not want to go through it all to find b...
I must say, the MCS020 seems to me quite a straightforward calculation as it is set out at present. It takes 3 minutes to complete. There is room for ...
This looks excellent for owners, potential owners and (should be mandatory for) installers! Should have check list that best practice would dictate sh...
I struggled a bit reading this. If your neighbour raises a noise complaint to the council that's big. They have to declare that if they sell the ho...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
I am amazed that there is not something out there to me...
By JamesPa , 47 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 6 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 12 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
