Last seen: Sep 19, 2024
@iainw COP stands for Coefficient of Performance, or efficiency in other worlds. Heat pumps absorb energy from the air or from the ground, or even f...
Hi Everyone, I watched a program the other day, on the BBC iPlayer, about the problems being experienced by the French Electricity Industry, and was...
@cathoderay The reading shown at 19:00 will be for the period from 18:00 to 19:00. Because it is displaying energy consumption as integers, hourly...
I'm afraid I am not an expert when it comes to building and the relevant cost. I suppose that you could ask a local Plumber and Builder for an approxi...
@cathoderay If you are going to keep records over a period of time, it may be useful to also note the weather conditions, to try to quantify the eff...
I would hope so, but obviously cannot state for certain. The pipework under the floorboards in our bungalow, which was built around the same time, app...
@cathoderay Sounds like a plan.
I would hope that the pipes going through the concrete floor would be insulated. Is there anyway of finding out is this is the case or not?
@cathoderay I have been giving your idea some thought and believe that it may be possible to have a simple spreadsheet calculation, that provides a ...
@marzipan71 Hi Steve, Thanks for the photo's. A motorised 3-way valve is like the one that is located in the pipework above connection 8 on the ...
@cathoderay Measuring the electrical power input is fairly simple, and there are plenty of power meters that can do this with reasonable accuracy. C...
@keithc Where is 'here'?
- 26 Forums
- 2,418 Topics
- 54.8 K Posts
- 329 Online
- 6,098 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Ecodan Pump Issues… Circulation pump turns off when heat pump compressor turns off
@jamespa sorry James, yes larger surface area, messing ...
By ASHP-BOBBA , 2 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In the Home Assistant firmware the data points...
By F1p , 2 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@johnbroome if it is not the pressure in the expansion ...
By ASHP-BOBBA , 2 hours ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
In recent cold weather th...
By JamesPa , 2 hours ago
-
So I hear the export MPAN that UKPN assigned should be ...
By Batpred , 5 hours ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
From what I read, the Solis has a very long list of err...
By Batpred , 5 hours ago
-
RE: Ideal HP290 14kW ASHP - how to optimise
Roughly this should cost you £250-£300 per peak month a...
By ASHP-BOBBA , 6 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
@toodles Thank you for your input. As the days have got...
By Synthbuilder , 10 hours ago
-
RE: Fan unit Making terrible noise HELP!!
@gutoffowc Oh no, sorry to hear that, are you in the Ke...
By ASHP-BOBBA , 12 hours ago
-
RE: Sunsynk Whole House Backup Issue
@sheriff-fatman - could you please re-post that in the ...
By Transparent , 12 hours ago
-
RE: Running my new Nibe ASHP efficiently
I didn't. I spent a while manually messing around with ...
By jamieheatpumpnew , 14 hours ago
-
RE: I’m glad the cold spell is over!
I comparison with the 65kWh used above yesterday was on...
By Judith , 14 hours ago
-
RE: Octopus Cosy 12 Heat Pump Regret: Incredibly Loud, Poor Heating & Constant Hum - Help!
I should think so, I thought that pretty much universal...
By JamesPa , 15 hours ago
-
RE: Setback savings - fact or fiction?
I'm also inclined to look into how a defrost is actuall...
By cathodeRay , 15 hours ago
-
MLCP (Multi-Layer Composite Pipe) for ASHP
@editor nope. The info you reported was sufficient for ...
By iotum , 1 day ago
-
RE: Experience - New Build / Complete New Heating System
@vincro I would be surprised if it is much above 5 to 6...
By ASHP-BOBBA , 1 day ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
Yes bang on and maybe I can illustrate that by way of e...
By iotum , 1 day ago
-


