Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Mar 2, 2025
@hughf you're gonna have to elaborate on that? What is PWM and what does it do?
@kev-m that's interesting, thanks. It's a very steep learning curve.
@transparent well, we were left with the manuals and told how to turn the temps up and down with the room stats and how to set a schedule for the hot ...
For information this is my flow temps now. It currently runs for around 7-8 mins then off for 3-4 mins. When running it's using 0.8kw. It's 10 degr...
@hughf just one cable to each one.
Might've just worked it out, unvented cylinder?
@hughf of course. But what is a UVC? 🙈
Hi. Unfortunately it was an eco4 grant installation so I doubt they even bothered with heat loss calcs. Likely just a guess and slap it in. 🤣 12kw d...
- 27 Forums
- 2,793 Topics
- 66 K Posts
- 3,640 Online
- 7,196 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
This post is about how I successfully configured a buff...
By Tony.Stolz , 15 minutes ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 2 hours ago
-
RE: Heat Geek installations: share your experiences
I struggled with this problem as well. An independent t...
By L8Again , 2 hours ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
I am not here to defend Heat geek or anyone else, but I...
By JamesPa , 2 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 4 hours ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 5 hours ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
@temperature_gradient Isn't that just describing a regu...
By Prunus , 5 hours ago
-
@etchedpixels I thought about that too, and between ...
By RonV. , 8 hours ago
-
RE: battery storage without solar
As of October 1st they need specific qualifications to ...
By EtchedPixels , 18 hours ago
-
RE: Renewables & Heat Pumps in the News
With regards to the BUS grant raid, I gave it more thou...
By ASHP-BOBBA , 19 hours ago
-
RE: Why are ASHP installs so expensive?
The whole system seems to work on the basis of...
By ian33a , 19 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
Good plan. If you can get half hourly meter readings a...
By JamesPa , 1 day ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
@editor Most certainly. The heat pump was an ideal s...
By Abernyte , 1 day ago
-
RE: Does anyone have experience of a smart water meter?
Yep I caught our slow leak from a £100 bill rise 8)
By EtchedPixels , 1 day ago



