Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 10, 2026
You may well be right, but I don't think I can be sure, because two things changed, but not quite at the same time: the outside temp and the heat pump...
Just tried again, and it worked. I did change the Met Office WOW link from a raw url (https:// etc) to am embedded link (some text with an embedded li...
Some evidence that the Midea 14kW unit can't quite cope at low ambient temperatures... I have finally got round to plotting hourly room temps vs out...
Will do, but the firewall is wrong, there was nothing that could be even remotely considered to be cross site scripting in the post, any more so than ...
The post has both an image and a link in it. I tried the image (it's just a chart) as both a png and a jpg and a pdf, and de-url'd the link (. -> d...
@editor - Sorry to post this here, but I am getting an error when I try to post on another thread: A potentially unsafe operation has been detected ...
@witchcraft and @editor - congratulations to both of you on getting this out there.
I buy my paint from a decorators merchant, but when I have a particular technical question about the product that goes beyond what a jobbing decorator...
Freedom will probably if asked say losing one sale doesn't matter, but they haven't just lost the sale, they have also lost some general goodwill. Obs...
@hughf - the whole thing is eye-watering. The minute numbers of actual installs is only the headline...
The thing i would be wary of is having no access to technical support. This forum is excellent, but they maybe something only Midea/Freedom know (part...
I will bow to the experts, but I thought defrost cycles were most needed between plus five degrees and minus whatever, and a unit that didn't defrost ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 17 minutes ago
-
RE: Adventures in heat loss calculations
Posted by: @jamespa At this point its probably worth...
By Rob of York , 2 hours ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 12 hours ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 17 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 2 days ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 2 days ago
-
Thank you @trebor12345
By rgabor , 2 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 3 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 3 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 3 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 6 days ago
SPONSORS
