Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 7, 2026
I found an announcement and a link here. This is a direct link to a PDF of the letter (link downloads the pdf). If neither of the above work, let ...
Not sure I agree with this, as the control period range spans almost all of the setback period range, meaning the extrapolation is small, and only app...
@jamespa - these may be of interest: plots of the periods at the end of the last heating season and the start of this heating season, when there were ...
I agree, and there is also the uptick at the left hand end very possibly due to declining COP as Set LWT increases. However, extrapolating beyond the ...
I do agree, how the the circulating pumps are treated for energy use is an unknown. I've been inclined to suppose they were part, maybe most, of the e...
The basic answer to this question (is there a vampire load and/or secondary heating source) is relatively straightforward. As far as I can tell, there...
I absolute do get it, and have done so for a time, but only with hindsight. At design/installation time the installer and I hadn't seen the Midea engi...
Not quite right: the available wall space was a significant constraint (no huge rads, allowing a lower LWT), but by using K3s and a high LWT, I could ...
@jamespa - all very interesting, with much to think about. The sun is shinning and I have other things to do today, but I will think about things as a...
I'm not sure I agree about the modelling, though I do 100% agree about more data. The R square values just tell us there is good correlation, which ca...
Welcome to the forum! By a curious coincidence, I used exactly the same quote back in the ancient mists of pre-history in this thread! This has b...
I said I thought I might have the answer, and I think on one level (though there are others), it is when you impose a return to baseline constraint ov...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: 7kW EV Charger Options Advice
@rusty Looks like there’s plenty of room in there for a...
By AndrewJ , 6 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay I think there is a reasonable argument t...
By Rob of York , 8 hours ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 12 hours ago
-
Hi @jamespa , @trebor12345 ,Thank you both for the repl...
By rgabor , 12 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 13 hours ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 13 hours ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 20 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 3 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 3 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 3 days ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 4 days ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 4 days ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 4 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 4 days ago
SPONSORS
