Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 31, 2026
@majordennisbloodnok Unfortunately it didnt work. Ill try and see why
@majordennisbloodnok Thanks. It does help. Am I right in thinking that an automation without a trigger could be written as a script?
@majordennisbloodnok Thanks again :-)Yes its the sun 2000 and it is the inverter that is DC coupled to my 10kWh (now) Luna battery. The fronius just ...
@majordennisbloodnok OK, Im happy with the energy dashboard now. I think the next think I would like to know how to do is force discharge the ba...
@majordennisbloodnok Yes, I see what you mean about helpers. The terminology is a bit different but the same functionality is present in emonpi. Im ma...
@majordennisbloodnok Thats actually excellent agreement. Unfortunately I have 2 inverters. The other is an older model without any interface im aware ...
@majordennisbloodnok Hi, yes I am. I do actually have feeds in my Emonpi for import and export so Im just wondering if I should give them a go instead...
@majordennisbloodnok Thanks, I have signed up for the Octopus Charge Pack so the HA and Predbat is partially a fall back position if that doesnt work ...
So I have (once again) taken the plunge into Home Assistant (HA) with a varying degree of success. So far I have set up an old laptop with the HA OS a...
@transparent thanks. Will be sure to keep a record of serial numbers with positions 😁
@old_scientist I didnt know that, so I should schedule an export during the session then 🙂
@toodles The fact that my Huawei was, was the real attraction for me 🙂 Its not compatible with Axle 🙁
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Siting of the external sensor on a heatpump
I agree. However I would also (primarily) expect that ...
By JamesPa , 6 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
You should (almost) always reject having a buffer, by w...
By JamesPa , 9 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 13 hours ago
-
RE: Is it the house or the equipment?
@majordennisbloodnok I do sympathise. On the original...
By springswood , 15 hours ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 19 hours ago
-
Sorry to hear about the problems, its going to be somet...
By JamesPa , 20 hours ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 1 day ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 1 day ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 2 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 3 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 3 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 3 days ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 3 days ago
SPONSORS
