Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 15, 2026
@majordennisbloodnok For my money no advice can be taken.. I do feel the status is as usual favouring professionals. But is the enthusiasm of the wi...
I really have no idea
I know this is a bit old, but it made me wonder what could have led to the use of PACE in 16kwh batteries, then replaced by Seplos (with JK balancers)...
Mine has a Seplos BMS, but I do not see the charging slowing. When it reaches 100 soc, it stops. Perhaps the slowing only works with some specific BMS...
My kit had a Seplos v3 BMS and a JK load balancer. Do you mean you replaced both with the JK drift pro?
@bash My DNO had already issued me with the MPAN. So while the Octopus process was not a "no win no fee" type of process, it was a calculated risk. ...
Thanks, does that leverage anything from your inverter and not available on the Solis? I am wondering if tuning the JK balancer that Fogstar include...
My graph shows a straight red line when charging to 100%, so it is not doing that:
@transparent I thought it is clear enough and helpful to @jancold and others. I saw the limitations of the timed discharge periods, they are actual...
You can press the test button. I posted a bit more about it above. In our case, we could use MCBs.. We may look at it again if we find a detail...
Yes, it was a very reasonable payment. Less than 10% of the £3200 the full MCS service would have costed us (of course not directly comparable)! ...
I acknowledge I have not been consistent in all previous posts! The reason I followed your post mentioning rcd and RCD with the definitions BEAMA (...
- 26 Forums
- 2,632 Topics
- 61.5 K Posts
- 235 Online
- 7,030 Members
Join Us!
Latest Posts
-
RE: Estimating true heat loss from twelve months of consumption data
@cathoderay Yes, a very fair analysis once again and ag...
By ian33a , 2 hours ago
-
Hi, Thank you. So its a Daikin Altherma 3M...
By Lbart68 , 3 hours ago
-
I have a Contactum CU. Would the below RCBO (descriptio...
By Batpred , 3 hours ago
-
RE: Samsung gen 7 HP 12kw - auto control issue and water law
@chainreaction Agree with @broadsman , it seems many ...
By Batpred , 4 hours ago
-
RE: Anyone concerned about GivEnergy?
@transparent Thank you and appreciate your timely reply...
By SUNNYSKIES , 4 hours ago
-
RE: Setback savings - fact or fiction?
@cathoderay thanks for your kind response; our cat does...
By PeterWurmsdobler , 5 hours ago
-
RE: Grant Aeona 3 R32 cycling with weather compensation.
The hot water heating looks normal. The heat transfer ...
By GrahamF , 10 hours ago
-
RE: A2A vs A2W: Which Heat Pump Would You Pick?
Good questions @temperature_gradient. My understanding ...
By springswood , 12 hours ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
All going according to plan, mid July we get that 7kW a...
By Batpred , 23 hours ago
-
Current metrics - DHW target set to 47c
By TaffontheTaff , 1 day ago
-
RE: My Grant R290 9kW Heat Pump Installation
@petch I'm very sorry that I have not picked up your po...
By GrahamF , 1 day ago
-
RE: New Solar, Batteries, Air Source and Under Floor Heating advice please
You’re right: UFH works best with high-conductivity fin...
By bafab , 1 day ago
-
RE: DIY or Don’t Touch? Solarman Smart Meter Install
That was my understanding also.
By JamesPa , 1 day ago
-
RE: Vaillant Sensocomfort Time
Oh I remember this from when I set mine up 2 years ago,...
By JamesPa , 2 days ago



