Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 12, 2026
That makes sense. Heat Geek seems to adjust their business based on their operational data and are also strategic in their options (like when their in...
That's great! I think we managed to get to that last month (no PV) but the heatpump will easily change that as winter approaches.
@majordennisbloodnok , I feel for you.. We had a similar "issue" with BMW. But after a few weeks after they locked any attempt to reverse engineer a...
You probably know this, but when going with a Heat Geek trained installer that is not operating through them, you could end up taking the risk of a no...
@trebor12345 the space saver on the Pro is just a funny way to say that it can be installed closer to opening windows, etc than the Plus. This is beca...
I have the space saving feature off, as not needed. But i believe that uses another fan anyway and the fan would probably not account for 150wh a day....
Not much to add to Majors comments. Personally, the disadvantage of having a charger relying on 4G was that even if our signal may be good, when I had...
No idea, mine reports the same, in fact with almost the same figures.. Looking at the detail, I see that most days in Aug it used 100-200w for heating...
Yes, and this is another point I agree. We did find a few contractual glitches along the way. On the main we accepted this small theoretical risk and ...
i agree that, in most cases, heat geek appoints the installer. But we used heat geek after choosing the installer. It is just a matter of getting a re...
yes and no. apparently HG’s AI was automatically assuming massive ventilation losses (and I noticed other posters mentioning the same in their case. S...
I had Solis check the config of my inverter to allow charging batteries overnight and a period of exporting roughly from 4 to 7... Made a few tweaks w...
- 27 Forums
- 2,766 Topics
- 65.1 K Posts
- 688 Online
- 7,169 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Siting of the external sensor on a heatpump
yes, it would have been easy to place it in permanent s...
By Batpred , 3 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
You should (amost) always reject having a buffer, by wh...
By JamesPa , 2 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 5 hours ago
-
RE: Is it the house or the equipment?
@majordennisbloodnok I do sympathise. On the original...
By springswood , 7 hours ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 11 hours ago
-
Sorry to hear about the problems, its going to be somet...
By JamesPa , 12 hours ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 1 day ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 1 day ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 1 day ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 2 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 2 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 3 days ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 3 days ago



