Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Nov 3, 2025
@prjohn thank you. That's 214 w/m2. As a note we were 244 w/m2, so about 10% higher than yourself in terms of heat demand per m2. I'm sure there a r...
@prjohn what's your floor space area you are heating? Would be good to understand your w/m2 to put the 24kW figure into context
64kW used and 184kW delivered yesterday in total for CH. COP 2.55 w/m2 244
@editor shading is killing me at the moment. Must be costing me 20kW a day, minimum
@editor if it makes you feel better, we've used about 80kw today with heating, hot water and general life - so you avoided all of that
@kev-m we are now at 49kW used and the average ambient has dropped to 4° Heat delivered 145kW COP: 2.95
@derek-m I think the sensors are integral. The only external sensor is in the hot water tank. Perhaps @grahamh can help. He seems to be the man who kn...
@derek-m as ever I'm always appreciative of the knowledge on this forum. All I was trying to say is that all models are built on a range of assumption...
@hr_3 depends on the rooms. 5 everywhere and then adjust the bedrooms as needed.
@keithh it didn't come up. However our upstairs is crazy in terms of insulation. It's 300mm solid between the walls, then 50mm on the outside plus 400...
@hr_3 do you know your current heating use in kW? You can just divide this by the total area of your house and that's your w/m2. However this will var...
@derek-m yes but that data came from the manufacturer about their performance based on lab testing. I can imagine in the real world the system is simp...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Tradespeople on Their Phones: What’s Acceptable When They’re Working in Your Home?
I know most of the folks I use pretty well so I'm fairl...
By EtchedPixels , 5 hours ago
-
RE: The Changing Jet Stream Could Challenge UK Air Source Heat Pumps
@susannasaunders I'll set this up and start monito...
By Rob of York , 6 hours ago
-
RE: Electrical works for air to air heat pump
An electrician who signs off work is responsible for it...
By EtchedPixels , 11 hours ago
-
RE: Are there any comparisons of DHW heat stores around?
@sarahemmm I have done things the opposite way round I ...
By Toodles , 11 hours ago
-
RE: 15kw pump for 225m2 1990's house - over kill?
@seaviews I have read you latest response re buffer ...
By JamesPa , 1 day ago
-
RE: How will removing the standing charge on gas bills benefit heat pumps?
The BUS grant funding for 2026/27 will run out at the c...
By Rob of York , 2 days ago
-
-
@editor Ouch, sorry to re start the tick. I had assume...
By DavidB , 3 days ago
-
RE: Say hello and introduce yourself
@e-a-west as the good Major said, welcome to the forums...
By Mars , 3 days ago
-
RE: How much of your renewable and home setup would still work if the internet went down?
Yes I actually have a copy of a tool that whenever a ce...
By EtchedPixels , 4 days ago
-
RE: Indevolt Batteries UK Support & Info Thread
@editor Hi, To resolve this, please tap on the A...
By Indevolt Tech , 4 days ago
-
RE: Double or Triple Glazed Windows?
Posted by: @singlespeed With 9 years repairing windo...
By Rob of York , 5 days ago
-
@transparent we’re still running a secure version of PH...
By Mars , 5 days ago
-
RE: How quickly would you want/expect heat recovery to take from setback?
Much longer than that here. The heating isn't even on. ...
By bobflux , 5 days ago
SPONSORS
