Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 26, 2026
@netdonkey excellent, I am glad I was thinking down the right track from the beginning, well done, the system really needs more flow than that, I woul...
@netdonkey yes you would have one in the condenser but its inside the cover and it would look something like that attached link. In your picture wh...
@netdonkey Sorry, one more thing, I note you say the system was installed in June 2024? if so, you are still well within your warranty and under HIES ...
@netdonkey I think if what you did just now made the system run for longer then it is air in the system and your flow may now have improved. As with...
@netdonkey Yes, the pump body is installed the correct way but the head (front of the pump is the wrong way), before the pump is installed it should h...
@netdonkey Reading the manual it looks like rotating the face is just to be able to read the interface, this instruction manual says to bleed to...
@netdonkey I am sorry to say, but I have just gone through the pictures again and although I cannot see the face of the pump I can clearly see the ...
@netdonkey We have a Evosta 3 set to fixed curve regulation mode level3. Is this correct? It looks like the Evosta has been installed upside dow...
@netdonkey I think you have an air lock, a restriction or for some reason a lack of flow.
@netdonkey Most 3 port valves dont look like they are all the way over but they are. You can ignore that lever for now. It looks like the arrows I ...
@transparent agreed. The labeling looks good.
@transparent So, as you would have it, its the law for exactly this in commercial applications over a specific size job under CDM regulations. Commerc...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@jamespa Maybe so, but which would be the first to ‘bre...
By Toodles , 8 minutes ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 24 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Posted by: @grahamf If you are considering phasi...
By Rob of York , 48 minutes ago
-
RE: Is it the house or the equipment?
Posted by: @springswood I'm working on passive ways ...
By Rob of York , 59 minutes ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
My first reaction is that these are prima facie much of...
By JamesPa , 6 hours ago
-
Never assume, it makes an ass of u and me! OK, tha...
By JamesPa , 20 hours ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 22 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 2 days ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 2 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 3 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 3 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 3 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 3 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 4 days ago
SPONSORS
