Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 26, 2026
i asked it the buffer question :0
@bart Best of luck moving forward, I look forward to hearing when all is settled and corrected for you. Please let us know once you have everything so...
Please note: heat meter accuracy at 95+% is as long as it is installed in the correct location, just thought I would add that before someone calls me ...
@richard24738 Hi, I think is fairly accurate, somewhere between 75-90% but I think this can vary between a pre-plumbed cylinder and a stand alone syst...
@richard24738 Hi, I don't actually know if they replace the data or if you get 3 sets of data from the app, Mitsi claim its more accurate but i think ...
@bart How you getting on with yours now?
@jamespa I love going on the tools, I did it yesterday, the engineers just look at me and smile like I should get back in the van lol. Last year I w...
@richard24738 They are 2 electric meters that are more accurate than the general data on the melcloud, they also interface with your FTC. I have at...
@mphb Which sensor is that supposed to be? I assume the primary flow or return? All of the pipework should be insulated but yes especially that prob...
@alfapat I found this video where they set more than 1 timer
@hcas Hi H, I think joule are the UK distributer through a lot of merchants for Samsung, @alfapat is it through Joule you are getting info? They supp...
@alfapat ah sorry to hear that, surprisingly I think Samsung are one of the most popular I unfortunately am not an expert in Samsung controls. Best...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you are considering phasing the project, then I woul...
By GrahamF , 6 hours ago
-
RE: Siting of the external sensor on a heatpump
Of course had the heat source been a heat pump it would...
By JamesPa , 8 hours ago
-
Never assume, it makes an ass of u and me! OK, tha...
By JamesPa , 8 hours ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 10 hours ago
-
RE: Is it the house or the equipment?
@springswood We have two Daikin single split A2A syst...
By Rob of York , 11 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 2 days ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 2 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 2 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 3 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 3 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 4 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 4 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 4 days ago
SPONSORS
