Activity
 
Notifications
Clear all
AllyFish
@allyfish
Contributor
Noble Member
Joined: Oct 31, 2022
Last seen: May 30, 2025
Topics: 22 / Replies: 465
Reply
RE: Widespread failure of insulation installation

I think there's a sector of the energy efficiency retrofit industry that is well meaning, but simply incompetent. There are two passive retrofit measu...

4 months ago
Forum
Reply
RE: Antifreeze corrosive to copper pipe rubber rings?

Hi there, and welcome @wyf. Glycol might not be compatible with all compression fittings that use rubber or neoprene sealing systems. Needs checking. ...

4 months ago
Reply
RE: Insulating brass fittings in Loft

I would insulate them, and any other valves bodies and buffer thank bulkhead fittings, etc. not currently insulated. You can't really over-insulate pi...

4 months ago
Reply
RE: Grant Aerona3 R32 HPIDI17 performance in low temperatures

Hello @davidm06, Grant 10kW owner here. We experience the same, the Grant Aerona R32 is a defrost-happy unit, one which will defrost every 40-50 minut...

4 months ago
Reply
RE: Vaillant Arotherm ASHP gets noisier when it gets colder outside

@jamespa it's a good find, thank you. Some inaccuracies however, including the assumption that split air source heat pumps have the compressor inside ...

5 months ago
Reply
RE: Vaillant Arotherm ASHP gets noisier when it gets colder outside

Our 10kW Grant Aerona also gets noticeably louder when cold. There's a few reasons why: 1. The ASHP is working very hard, the compressor frequency i...

5 months ago
Reply
RE: Advice please on optimising Grant Aerona R32 17 kW

Hi @steam-powered, @mikefl makes good points above, especially balancing the low loss header if you have one. If you don't have any flow setting or mo...

5 months ago
Reply
RE: Outcome for 2024 - with Agile, ASHP, PV, Batteries, EV

Our 2024 year end summary: 1992 EPC C house (76%) 155m2. 10kW ASHP primary CH & DHW, 5kW wood stove secondary heating for colder winter evening us...

5 months ago
Reply
RE: MCS heat pump pre-sale information and performance calculation

Rubbish in = rubbish out.EPCs are not reliable with too many assumptions at the discretion of the energy assessor. I downloaded the MCS 031 system p...

6 months ago
Reply
RE: Raising product standards for space heating

A big 'hmmm' from me. 😉 The elephant in the sitting room is not the efficiency and rated performance of heat pumps when tested to BS EN 14511 or BS...

6 months ago
Reply
RE: Has anyone replaced an old ASHP with a new one?

Just be mindful of installation restrictions on newer A3 class R290 refrigerant (Propane) ASHP monobloc units. There are rules to follow concerning lo...

6 months ago
Reply
RE: Difficult positioning of air source heat pump

Good update 🙂 Cosy 6 aka 'The Maddy D's Bin' has a inclined fan outlet, but the fan outlet is not a freezing risk anyway, that risk is only from cond...

6 months ago
Page 3 / 41
Share:

Join Us!

Trusted Installers

Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.

✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available

👉 Find your installer now!

Latest Posts

x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
Shield Security