Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 11, 2026
@agentgeorge this is a pic of the bleed valve that’s snapped. It should have a square bleed pin in the centre of that sort of nut insert.
@agentgeorge this is on a 30 year old rad at a guess. They’re like an odd little insert that is about 10-15mm in size with the bleed screw in the cent...
If the Vaillant is a 7kw unit I’d avoid. Quiet outside noisy inside when it’s going full on. They have a problem with compressor vibration being trans...
They’ve had to cancel the radiator balancing at the last minute for similar problems as they’ve used before, sickness or vehicle problems, bit of a ha...
@jamespa hopefully after the rad balancing it will perform better, as I think at the moment the water is short circuiting back to the hp through the f...
@jamespa I contacted the installer and asked them to balance the rads. They’ve replied, surprisingly, and will be over this Friday. I assume they are ...
@toodles nope my installer only capped the flow return and dhw pipe work. had to get my plumber to remove the boiler, hw tank, loft tank, tidy pipe wo...
@jamespa going to bin this and see if i can get it working on a pi3. dont want to spend open energy monitor levels of money but i need to see what t...
@jamespa ive had a look at the firmware card in the add cards section and those entries are listed under attributes along with what looks like everyth...
@jamespa yes ive got all those on my dashboard already. its the current power one i cant find. if i go into developer tools and states then scroll d...
this is what ive got on the arotherm.
have you got an ebus adapter on yours?
- 27 Forums
- 2,767 Topics
- 65.1 K Posts
- 1,632 Online
- 7,169 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you are considering phasing the project, then I woul...
By GrahamF , 6 hours ago
-
RE: Siting of the external sensor on a heatpump
Of course had the heat source been a heat pump it would...
By JamesPa , 8 hours ago
-
Never assume, it makes an ass of u and me! OK, tha...
By JamesPa , 8 hours ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 10 hours ago
-
RE: Is it the house or the equipment?
@springswood We have two Daikin single split A2A syst...
By Rob of York , 11 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 2 days ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 2 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 2 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 3 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 3 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 4 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 4 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 4 days ago



