Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 11, 2026
@jamespa no airflow problems definitely. primaries 28mm, got a few bends. flow and return to about half the rad back bone 28mm. other half fed from tw...
@jamespa last 24hr according to the Vaillant app 2.55.
@jamespa just saw this massive spike on energy consumed which is sat in between two hot water heating mode on status. maybe a defrost?
@jamespa i seem to remember someone when i was digging for info on rad balancing saying they were having trouble as the Vaillant seems to want to cont...
@jamespa this is a graph with both flow and return on. seems to be keeping a 2.5c gap between them.
@jamespa ive just pulled the flow temp from the Havenwise data, as im at work so cant spin up Home Assistant. its only a few days and the first few da...
@jamespa there is data for hrs and on/off cycles. But since switching to Havenwise that Vaillant app status page doesn't seem to be updating. Until ar...
I might try a wipe and re install of Home Assistant to see if I can get the power info to show. Was going to put it on a RPI 3B I have but it won't wo...
ok now i had some cold days i think i can safely say i have an issue with either the heat pump or the install. im getting as low as 2.4 scop for hea...
facebook group.
@agentgeorge it has got 2, the other bleed screw is the other end.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you are considering phasing the project, then I woul...
By GrahamF , 5 hours ago
-
RE: Siting of the external sensor on a heatpump
Of course had the heat source been a heat pump it would...
By JamesPa , 7 hours ago
-
Never assume, it makes an ass of u and me! OK, tha...
By JamesPa , 7 hours ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 9 hours ago
-
RE: Is it the house or the equipment?
@springswood We have two Daikin single split A2A syst...
By Rob of York , 10 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 2 days ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 2 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 2 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 2 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 3 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 4 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 4 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 4 days ago
SPONSORS
