Recent Posts

| Forums | Topics

Page 66 / 165 Prev Next

Posts with their shortened content
	RE: Midea ASHP – how to set weather compensation By pash44pump, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@cathoderay How would you suggest I go about collecting energy out data given what you know already about what data collection I can currently do with dataloggers, energy in and COP assumptions? Do th...
	RE: How can I programme a setback for my Samsung Gen6 8kW heat pump? By Old_Scientist, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I'm not familiar with Hive thermostats/controllers, but as @jamespa says, not all external thermostats work well with heat pumps. Mine has 3 different modes, so I just use the simple on/off configurat...
	RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters By colinc, 2 weeks ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@jamespa Well, you must have been an "early adopter" for solar panels; what I describe as "bleeding edge" as opposed to the 'leading edge", and will have gained considerable experience over that time ...
	RE: How can I programme a setback for my Samsung Gen6 8kW heat pump? By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	No the whole house is on one zone operating at a single FT. In principle the rads in the bedrooms should have been designed for a lower room temp (ie made smaller than would otherwise be the case) bu...
	RE: How can I programme a setback for my Samsung Gen6 8kW heat pump? By richdorm, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa Thanks so much - so are your bedrooms on a different zone to the rest of the house?
	RE: How can I programme a setback for my Samsung Gen6 8kW heat pump? By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Not really in the way you describe The effect at best would be to switch it off altogether until the house cools. It wont limit it by reducing FT, which is what you really want to do. However I thin...
	RE: Battery disconnected By Majordennisbloodnok, 2 weeks ago Forum Energy Storage
	From my experience of the Shine app, I'd say that's not a safe assumption. I'd say it's confirming the inverter is up and running and the wifi dongle is connecting to the Internet but beyond that I'd ...
	RE: How can I programme a setback for my Samsung Gen6 8kW heat pump? By richdorm, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@old_scientist so - I have a Hive thermostat, which I've currently got set to 25 (!) so that I could set up the water law without it interfering.I guess having the hive means I've got an "external the...
	RE: Radiator Sizing Dilemma: Vertical vs Type 33 for Low-Temperature Heat Pump Systems By JamesPa, 2 weeks ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	Thats definitely not a bad approach, combined with a bit of pragmatism. If there is a nice radiator already present which is a few tens of watts short, dont worry or make it up from adjacent rooms. I...
	RE: Battery disconnected By Transparent, 2 weeks ago Forum Energy Storage
	That's better news. If Cahill can locate the problem today, then they will receive (free) accolades here in the Forum, of course! At this stage I don't think we're too concerned what the fault turns o...
	RE: Radiator Sizing Dilemma: Vertical vs Type 33 for Low-Temperature Heat Pump Systems By DREI, 2 weeks ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	Would you say try and specc each room by around 10% to 20% uplift and if not possible make it up in other areas? With us, the whole house stays open, all the doors etc, except for the be...
	RE: Radiator Sizing Dilemma: Vertical vs Type 33 for Low-Temperature Heat Pump Systems By Old_Scientist, 2 weeks ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	I would second this. It's great if you can balance radiator output exactly to the design heat loss for the room, but I wouldn't get too hung up about it. You will get heat transfer from adjoining room...