Recent Posts

| Forums | Topics

Page 41 / 166 Prev Next

Posts with their shortened content
	RE: Electricity price predictions By Batpred, 1 week ago Forum Electricity, Tariffs, Monitoring & Providers
	Perhaps, but it has hardly been perfect elsewhere. The GB plan is there, clearing of the connections backlog was made a priority. NESO is talking about a backlog/gridlock becoming a delivery pipeline...
	Is the cycling rate acceptable on my Ideal Logic Air 4kW air source heat pump? By Mattyb, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	Hi all, New to the forum but been lurking from time to time. A newbie to HP life. Had an install of an Ideal logic air 4kw last November.Very happy with it performance... beyond expectations to be hon...
	RE: Setback savings - fact or fiction? By SUNandAIR, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	So, as James suggests in a thread above. You can’t make a universal statement about a heat pump performance if it only applies to a specific system. This is the case regarding @robs “Detailed Analysis...
	RE: Domestic wind turbines By Batpred, 1 week ago Forum Wind Generation
	There seem to be plenty of systems available, including that Dump load component, essential to deal with over production. Attachment : image.png
	RE: New Solar, Batteries, Air Source and Under Floor Heating advice please By sjc123456789, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	Yes, good points. I chose the aluminium / metal spreader plates where the pipe clicks in (there at 400mm centres) Under it there is 100mm Kingspan type pir. The cavity under the floor varies from abou...
	RE: Domestic wind turbines By Batpred, 1 week ago Forum Wind Generation
	I am pleased that the image of a catastrophic effect on bird population (that some world leaders showed extreme empathy for) did not influence our legal planning framework! Interesting, but could we...
	RE: New Solar, Batteries, Air Source and Under Floor Heating advice please By bobflux, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	This Gypdeck? Thermal conductivity (0.40W/mK) OK so it's the same as Fermacell, twice as good as wood (about 0.2W/mK). I just did the design for my radiant ceiling, and the materials are similar, ex...
	RE: Electricity price predictions By JamesPa, 1 week ago Forum Electricity, Tariffs, Monitoring & Providers
	Much of the last decade was consumed by the consequences of a decision that the UK public made in 2016, and by Covid. I doubt that left much bandwidth for other matters, whether or not the will was p...
	RE: Domestic wind turbines By Deltona, 1 week ago Forum Wind Generation
	After much research we'll be getting an Istabreeze Heli 4.
	Screed Boards (like Gypdeck Structural 18mm Board) or standard flooring By sjc123456789, 1 week ago Forum Insulation
	I need help!!! (on a number of levels). Just about to get 100sqm of UFH put in on the ground floor of our house via spreader plates on 400mm joists and wondering what is the best structural board to p...
	RE: New Solar, Batteries, Air Source and Under Floor Heating advice please By sjc123456789, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	@bobflux Thanks Bob, that makes a lot of sense. I'm looking at another 6kw of solar to go with the 11kw we have on the garage, we've 2 1/2 electric cars (Smart Fortwo EQ). While we had gas the 16kw o...
	RE: Heat Pump Fuse Type By Batpred, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	Agreed, CU manufacturers provide a warranty that their CUs comply with IET's BS7671, only if used according to instructions. While I agree with what @transparent stated, it is going to be up to the el...