| Posts with their shortened content | ||
|
|
RE: Free Ecoheat Heat Pump Install
By Deltona, 19 hours ago |
|
| Thanks for the tip, I watched his two house installs over Christmas, but not the inlaws one yet. He's certainly a smart guy. As previously mentioned you need the practical experience to go wit... | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By JamesPa, 19 hours ago
Forum
Energy Storage
|
|
| Thanks Ah, so that places the 'off grid' port of the inverter between grid and load so protecting the grid. However it does introduce another complexity: either the inverter must be capable of supp... | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By Transparent, 20 hours ago
Forum
Energy Storage
|
|
| No. The Solis and Sunsynk inverters which we're discussing have two separate ports, both of which can supply household loads from your incoming solar. One port connects to the grid, and will cease to ... | ||
|
|
RE: Radiator sizing sanity check
By JamesPa, 21 hours ago |
|
| As I mentioned early on the cost of supplying and fitting a few rads is negligible. It certainly shouldn't come to legal proceedings if this is the bulk of whats needed! | ||
|
|
RE: Radiator sizing sanity check
By Papahuhu, 21 hours ago |
|
| @jamespa Luckily I have the whole process documented as I could see it had become a comedy of errors. The insulation measures were installed by a sub contractor to the sub contractor, neither of whic... | ||
|
|
RE: Radiator sizing sanity check
By JamesPa, 21 hours ago |
|
| Thanks for the update. As you say you are now piggy in the middle. Its sometimes said that legal cases are won by those with the best filing system. Your main contractor will presumably say that he... | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By JamesPa, 22 hours ago
Forum
Energy Storage
|
|
| @batpred, @transparent thanks Since the inverter isn't between the mains and the CU, does this need an (automatic?) cut out device that is between CU and incoming feed. Surely it does? Apar... | ||
|
|
RE: Radiator sizing sanity check
By Papahuhu, 22 hours ago |
|
| @jamespa A minor update. The heat survey was repeated yesterday and turned out the heat loss in bedrooms was wildly inaccurate. The original survey was done on the basis of information provided by th... | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By Transparent, 22 hours ago
Forum
Energy Storage
|
|
| The configuration you will implement depends on what your DNO's Network Planner will approve. Whilst both approaches you've described would appear to be technically achievable, it's the Regulations wh... | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By Batpred, 22 hours ago
Forum
Energy Storage
|
|
| It can be made to look as complex as we want! I believe the safest from a reg pov is to use scenario 2. Since your sunnyboy does not have a CT clamp and the G99 scheme expects one. 2) conne... | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By Batpred, 22 hours ago
Forum
Energy Storage
|
|
| I currently have this setup with the CT clamp/coil being connected "via" their (optional) meter to the inverter. It works without any dependency on the cloud. All access to the internet is via an opti... | ||
|
|
RE: Recommended home battery inverters + regulatory matters - help requested
By JamesPa, 23 hours ago
Forum
Energy Storage
|
|
| Thanks all for the help, this seems to be nearly as complex as heating! My current thought process, and the remaining questions, are this: New battery inverter with perhaps a 5kW max out... | ||
- 26 Forums
- 2,396 Topics
- 54.3 K Posts
- 250 Online
- 6,077 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Recommended home battery inverters + regulatory matters - help requested
This is a typical/higher consumption day, the main acti...
By Batpred , 10 minutes ago
-
RE: Running from backup generaor in powercut?
Right on topic, Storm Goretti has done its thing and we...
By Mars , 20 minutes ago
-
RE: Help me keep the faith with my air source heat pump installation
@simonf I’ll ask the installers to get them out. What k...
By AdamK , 8 hours ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
I doubt that matters, ToU tariffs are for the benefit o...
By JamesPa , 16 hours ago
-
RE: Free Ecoheat Heat Pump Install
@deltona Yes older houses are problematic like that, bu...
By bontwoody , 18 hours ago
-
RE: Radiator sizing sanity check
As I mentioned early on the cost of supplying and fitti...
By JamesPa , 21 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
I hadn't spotted that there were two pumps in the UFH (...
By JamesPa , 23 hours ago
-
RE: Setback savings - fact or fiction?
Never assume it makes an ass of u and me! You need the...
By JamesPa , 23 hours ago
-
RE: New Mitsubishi Ecodan 11.2kW installation - L9 errors and maybe more
Before I answer your specific questions just one more t...
By JamesPa , 23 hours ago
-
RE: Electricity price predictions
Great point, one of the key ones in my chat with Octopu...
By Batpred , 1 day ago
-
RE: New Fogstar 15.5kWh upright solution
Let me point out that there are many Chinese suppliers ...
By Transparent , 2 days ago
-
RE: Weather compensation- why you should use it
@majordennisbloodnok — The Two Ronnies Mastermind sketc...
By cathodeRay , 2 days ago
-
Just realised that this image of the cylinder cupboard ...
By Sheriff Fatman , 2 days ago
-
RE: Rodents! A word of warning for heat pump owners
Two thoughts: 1: Let's ask @david-s if Primary Pro in...
By Transparent , 2 days ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
In the diagram below, I describe my understanding of th...
By Batpred , 2 days ago
-
I need to have a look out for it. I know IBM feeds some...
By Batpred , 2 days ago
-
-
RE: Daikin Atherma ASHP Cycling 6 Times an Hour?
Thanks for your reply. Yes that's a good idea to try a...
By John Marshall , 2 days ago
-
RE: Hot water heating in parallel with space heating
An external heat exchanger would need a pump which woul...
By bontwoody , 2 days ago
-
RE: Gen 6 Samsung ASHP losing 20C of DHW in 60 min directly after generation
@ecobaker Thanks for this. I've had it in both slots. ...
By andbeck , 2 days ago

