Recent Posts

| Forums | Topics

Page 49 / 60 Prev Next

Posts with their shortened content
	RE: Thinking of ripping our my IVT Greenline HT Plus C model and replacing with a gas boiler. By JamesPa, 3 weeks ago Forum Grounds Source Heat Pump (GSHPs)
	That's great and in principle I wouldn't disagree, but if someone is being quoted 18K to fix a heating system then I can fully understand their reluctance (and surely you can also) - that's just silly...
	RE: Thinking of ripping our my IVT Greenline HT Plus C model and replacing with a gas boiler. By Watkins247, 3 weeks ago Forum Grounds Source Heat Pump (GSHPs)
	@jamespa No good location to put ASHP would need considerable building work. Meaning cost very similiar.
	RE: Air Changes per Hour - ACH and the MCS requirement By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba My personal perspective on this, based on my own experience and the sad stories I read on this forum, is that the industry as a whole (I'm emphatically not speaking about you - you obvious...
	RE: Thinking of ripping our my IVT Greenline HT Plus C model and replacing with a gas boiler. By greenlight, 3 weeks ago Forum Grounds Source Heat Pump (GSHPs)
	Should be a minimum sentence of 3 years behind bars for anyone who replaces a geothermal (assuming a good collector) with an air to water 🤣. I’ve 6,000 plus customers with both geo and air to ...
	RE: Thinking of ripping our my IVT Greenline HT Plus C model and replacing with a gas boiler. By JamesPa, 3 weeks ago Forum Grounds Source Heat Pump (GSHPs)
	What's to stop you simply replacing the heating bit with an ashp. Presumably all the emutters etc are fine so it's just a straight swap of heat source which shouldn't cost anything like 16k and is mo...
	RE: Thinking of ripping our my IVT Greenline HT Plus C model and replacing with a gas boiler. By AF1, 3 weeks ago Forum Grounds Source Heat Pump (GSHPs)
	Hi, I have retrofit IVT GL C11 fitted in 2011 (Badly). We had to immediately rip out and replace all the pipework with much bigger diameter to up the flow and fitted a Magnaclean. The GSHP then functi...
	RE: Thinking of ripping our my IVT Greenline HT Plus C model and replacing with a gas boiler. By AF1, 3 weeks ago Forum Grounds Source Heat Pump (GSHPs)

	RE: Flow Rate & Low Loss Headers By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Further to the above I found the Aurora/AdlerCastra user Manual ADLAR.CO.UK "https://www.adlar.co.uk/wp-content/uploads/2024/05/Adlar-Castra-User-Manual-Guide.pdf" Page 4 concerns me, the WC cur...
	RE: Air source heat pump roll call – what heat pump brand and model do you have? By Nell, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Mitsubishi 8.5 kW Ecodan Standalone (PUZ-WM85VAA)
	RE: Forum updates, announcements & issues By Old_Scientist, 3 weeks ago Forum Introductions, Forum Rules & Updates
	Seems a little quicker now - the initial delay feels shorter and a lot less noticeable.