Recent Posts

| Forums | Topics

Page 48 / 158 Prev Next

Posts with their shortened content
	RE: Help me keep the faith with my air source heat pump installation By AgentGeorge, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	@adamk I run the downstairs UFH as an open loop, the kitchen/lounge pipework is 250m of 16mm, add to that the 4th bedroom 100m, which is restricted to 1L/m flow rate. The upstairs bedrooms are on TRVs...
	RE: UFH downstairs and radiators upstairs balancing question By ASHP-BOBBA, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@walnut-tree-cottage So you have no stats on any of the UFH and its fully open loop? if this is the case you need to make sure the Rads are DT5 and the UFH is DT5 and get them as balanced as you can a...
	RE: UFH downstairs and radiators upstairs balancing question By Walnut-tree-cottage, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	This is confusing dude. The 'stat which is a vaillant sensocomfort by the way is the only control. So if it shuts off the heat it will also do so for the Rads upstairs. Therefore wouldn't a higher WC ...
	RE: Oil Boiler & Heat Pump Hybrid System By paultheheating, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	thanks for your reply, tried to explain that tenants for us appear transitent, currently three tenants in the same number of years, first were police but they were moved by their job second were the l...
	RE: Help me keep the faith with my air source heat pump installation By AdamK, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa I contacted the installer and asked them to balance the rads. They’ve replied, surprisingly, and will be over this Friday. I assume they are doing this as part of the commissioning process an...
	RE: UFH downstairs and radiators upstairs balancing question By ASHP-BOBBA, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@walnut-tree-cottage My bad, sorry I transpose while trying to do 3 things at once, so its worth measuring what the DT is on the radiators to see how they are performing, and it would help if you knew...
	RE: UFH downstairs and radiators upstairs balancing question By Walnut-tree-cottage, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	"DT measure the rad in the hall to 4DT" there is no Rad in the hall dude. It has a UFH loop. I have a thermal camera.
	RE: Who has a V2G EV installation By Batpred, 1 week ago Forum Energy Storage
	They certainly look stylish! But it seems that Andersen chargers are not (currently) supported by Octopus for their Intelligent Go tariff. Strange as they have been around for a while. I am not sure ...
	RE: UFH downstairs and radiators upstairs balancing question By ASHP-BOBBA, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@walnut-tree-cottage - Pop all the heads off the UFH rail, wind the balancing valves all the way down to close, DT measure the rad in the hall to 4DT and then open the UFH valves to 1L/pm. Then once y...
	RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do? By Mars, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	And if MCS don’t have one on record that’s an issue because MCS can’t/shouldn’t issue a certificate without one, and I would then put MCS on the spot asking how this could have happened. Definitely ke...
	RE: My DIY Heat Pump installation By Mars, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	@polar-bear, I take my hat off to you. I wish I had the skillset to take something like this on. The unit itself looks smart enough. Yeah, bummer about the Chinese instructions. Is there an electronic...