Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 122 / 172
Posts with their shortened content
RE: Pump and Esbe mixing valve for UFH  

By AndyCoo, 3 weeks ago

  @pirate-rich Thanks for the quick reply! That makes sense, it’s an easier option for wholesalers and plumbers using a lot of valves that they just need one type to cover multiple scenarios. But for li...
RE: Low COP and unevenly heated rooms with 12kW Samsung AE120MXTPEH / AE260TNWTEH  

By JamesPa, 3 weeks ago

  Im going to try to take a practical approach to this, ie what can you do with what you have. Im also going to take it in steps. So you need to balance the emitters (loops). This is an essential pa...
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank - Heat Pump Retrofix  

By JamesPa, 3 weeks ago

  Even that may not be enough. Air can still collect, it seems, at local high points eg tall radiators, which will need to be manually bled unless also fitted with an an ARV. Despite having an ARV at ...
RE: Low COP and unevenly heated rooms with 12kW Samsung AE120MXTPEH / AE260TNWTEH  

By bonobo, 3 weeks ago

  Hi, @heatgeek . Thank you for getting back to me, i appreciate your well thought suggestions. Apologies for the 8 month delay - life got in the way. original project was done by a professional heating...
Pirate Rich RE: Should Our Water Circulation Pump Be Configured to Run All The Time?  

By Pirate Rich, 3 weeks ago

  The Grant engineer has given you the correct information. If you let the water stop completely each time the compressor stops, consider what happens to the water in the pipes outside versus the pipes ...
Morgan RE: How good is the app support for your heat pump?  

By Morgan, 3 weeks ago

  Like @majordennisbloodnok I have the Mitsi Ecodan and Melcloud. Melcloud sucks, and the major sums it up very well, particularly in his last paragraph. Enough said. I will be pushing the button to act...
Majordennisbloodnok RE: 5 Star Service from Havenwise  

By Majordennisbloodnok, 3 weeks ago

  Totally agree, @hcas. I think there's a bit of a conflict, though. As you will have seen on this very forum, you now have quite a well-established reputation for up-front open and honest dealing, but ...
Pirate Rich RE: Pump and mixing valve for UFH  

By Pirate Rich, 3 weeks ago

  VRG131 is just a popular valve and can be adapted to any size using fittings. The pump can be chosen based on the pressure loss. What will be in control the ESBE valve actuator? We are an ESBE special...
Pump and Esbe mixing valve for UFH  

By AndyCoo, 3 weeks ago

  Hi everyone Looking for some help with pump and esbe mixing valve selection for our UfH. We installed the loops and manifold in the Summer along with our geocell and limecrete floor. Now we are the st...
Pirate Rich RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank - Heat Pump Retrofix  

By Pirate Rich, 3 weeks ago

  Exactly what I said in the video, and that is one of the worst AAVs in the market, so they can expect leaks in the future.  
Transparent RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank - Heat Pump Retrofix  

By Transparent, 3 weeks ago

  Merely having air-release valves present isn't enough.They also need to be placed at the highest points in the pipework because that's where the air will collect. Look at this photo of a cylinder fitt...
Majordennisbloodnok RE: How good is the app support for your heat pump?  

By Majordennisbloodnok, 3 weeks ago

  Show and tell, eh? OK, here goes. I've got a Mitsi Ecodan and, as a unit, it works brilliantly; I've no complaints. The app, however, is a totally different story. They call their app Melcloud and str...
Page 122 / 172

 

 

 

Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO