Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 5, 2026
it should be noted that Octopus Agile Outgoing average prices in Sept last year was around 30p (with quite a big range of prices) when the Fixed rate ...
latest Tracker price updates for Electricity tariff - Tracker Nov 2022 V1 (Southern England) :Today : 18.14p/kWhTomorrow : 17.89p/kWh still worth co...
We built a large garage with additional accommodation in 1997. No insulation in the floor. In 2013 we got planning to convert to a self contained dw...
@iancalderbank Solaredge say that I'll need to go through one of their installers to get it setup. Bit of a nuisance but I suppose no big surprise.I w...
@iancalderbank thanks for checking. i'll get on the case
@iancalderbank thanks Ian. Yes, would be a huge advantage. Tbh I'm not sure if my kit can be retro-connected. It was installed in 2015 but you're ri...
@transparent that makes sense. Yes, it's a MCS-approved meter on the mains-output side of the inverter. The newer system has its own EM115. Bot...
@transparent many thanks for the helpful thoughts. Yes, seems worth getting a kit to help narrow things down. Again today in reasonably good sunny c...
between the showers this am we have some bright sun. At one point the flat roof is producing the expected peak 6kw from 6.5kw nominal however the o...
@transparent sounds about right! I'll get my tools out and have a go at the website. Just needs a hammer! T&E hopefully OK as it's not going t...
@transparent @derek-m in case it helps... here is pic
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 3 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
Sooooo, what did we do in the end? We approached three ...
By Penval , 4 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 9 hours ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 11 hours ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 11 hours ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 12 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 1 day ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 1 day ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 3 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 3 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 4 days ago
SPONSORS
