Last seen: Mar 17, 2025
@hughf I've heard about these but unfortunately I wouldn't be allowed to make any mods to my system.
@scratchyman Yeah, the defrost cycle is enabled. I wouldn't want my circ pump running 24/7 to be honest with you. Getting crazy low night time temps h...
I asked for the glycol level to be checked for my ASHP as it's so frequently topped up due to endless pressure drops. Using a refractometer the guy sa...
@cathoderay Easy to find out who is behind MCS. My personal experience so far, and to the detriment of my health, is that any concerned or dissenting ...
@webcmg Hi, unfortunately this whole situation has caused a massive relapse in my health condition so I have had to shelve things for the time being a...
@grahamh What about tenants? 😉
Hi @hughf My running costs were lower with my previous pump so is it a control systems issue?? My house did not require a high temp pump to be fitted...
@grahamh Every engineer that has been here has their own ideas about set up, and the manufacturer's own engineers can't agree among themselves either,...
@grahamh I tried this last Autumn/Winter with my HP and the bills were shockingly high. Could be related to bad set up/leaks at that time but as I kee...
This energy 'expert' has obviously never personally experienced fuel poverty. These are not extreme lengths to many or crazy ideas of 'daring househol...
In Wales it appears it is 1 cubic metre (according to the Wales Gov webpage). I'm wondering why there are differences between countries?
@editor Hi Mars, I posted a little update on the other thread but as far as my complaint/write up goes I am aiming to finish by the end of the month. ...
- 26 Forums
- 2,406 Topics
- 54.6 K Posts
- 378 Online
- 6,092 Members
Join Us!
Worth Watching
Latest Posts
-
We are 2 weeks away from our HP install. In October I...
By Bash , 2 minutes ago
-
RE: Experience - New Build / Complete New Heating System
Welcome to the forums @vincro and good luck with finali...
By Mars , 3 minutes ago
-
I’m glad the cold spell is over!
Just a sigh of relief that the cold spell is over and t...
By Judith , 14 minutes ago
-
RE: Heat pump not reaching flow temperature
@jamespa the compressor does run at max operating frequ...
By DaveC , 15 minutes ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
@johnbroome As I say I think you probably have a fau...
By JamesPa , 27 minutes ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
So far as i can see no because its NOT connected to the...
By JamesPa , 2 hours ago
-
RE: Please help with the settings ecodan
Hi and welcome to the forums.Does your system use a Mit...
By Sheriff Fatman , 2 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
I forgot to mention: Octopus measured our heat loss at ...
By Toodles , 3 hours ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
Thanks Mars and thank you for reaching out to so many p...
By iotum , 3 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: @davec Manufacturer: Peak Energy Mode...
By DaveC , 3 hours ago
-
RE: Rate the quality of your heat pump design and installation
@radwhispererdwhisperereorourkeditor Well, the guy came...
By razz , 3 hours ago
-
RE: Setback savings - fact or fiction?
Given the weather has been relatively stable, the empir...
By Batpred , 4 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@editor That is very kind! Thank you so much.
By johnbroome , 5 hours ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@wally Hi I am not sure how large your house is b...
By TechnoGeek , 6 hours ago
-
RE: Predicted Heat Loss & Needs from MCS calcs vs EPC vs actual
I've been thinking along similar lines to @tim441 from ...
By Sheriff Fatman , 7 hours ago
-
Thanks, @technogeek. Good to hear about the accuracy. ...
By Majordennisbloodnok , 7 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In my case it was a very specific pattern of behaviour ...
By Sheriff Fatman , 7 hours ago
-
RE: Vaillant aroTherm not heating with many faults
@ashp-bobba Yeah I'll give it a go, will check filter...
By Anon67 , 8 hours ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@transparent Perhaps the names at the end of the docume...
By Toodles , 8 hours ago

