Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 14, 2026
@jamespa Thanks for the help. Yes, I’m going to push for significant upsizing of all cold room rads, about 8 of them. Probably at least 50% greater ou...
@jamespa It was -7C here last night, the heat pump continued to behave exactly the same on/off, all it did was operate at an even higher output tha...
@jamespa Thank you, I appreciate the advice. I have a couple of cards that should give me some leverage and some hope that I can persuade them to...
@jamespa this afternoon I was told whom was being sub contracted to repeat my heat loss survey next week. When I checked him up he runs a plumbing ...
They’ve had a while to settle down and both read nearly exactly the same, within 0.5C. Therefore you were right, they are providing anomalous result...
@toodles thanks Toodles. That looks like the most probable explanation then. I’ve just taped mine on, I’ll give it an hour to let it all settle down, ...
@jamespa I’ll gorilla tape another one it to the side of the radiator then, somewhere near the inlet. Then compare both readings and get back to yo...
@jamespa they are IP54 data logging temp and humidity sensors that send a Bluetooth signal back to my computer. Rather than PT100 type RTDs. But, y...
Hence my question on the forum 😀 But what, is the question. The temp measuring devices I purchased are mid price range, not budget jobs. Ac...
Yes, that’s exactly what is happening. The only thing to add to it is that it’s a relatively spacious room at 110m3 in volume according to the survey,...
Thanks I will try to put it down chronologically. As background, here is my internal system, installed in an unheated garage. The only part you can’...
The heat pump unit I have, Samsung gen6 16kW mono, single phase. The manual states the nominal flow rate as 46.7 l/min, when I go and check my actual ...
- 27 Forums
- 2,749 Topics
- 64.7 K Posts
- 1,069 Online
- 7,157 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 1 hour ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 1 hour ago
-
RE: Questions about A2A for heating as well as cooling
@donciccio I would suggest that you take a "fabric-fi...
By Rob of York , 2 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
Any idea how efficient your gas boiler is? Is it a 50 y...
By Old_Scientist , 7 hours ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 19 hours ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 1 day ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 2 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 2 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 2 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 3 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 6 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 6 days ago



