Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 17, 2024
Hi @jamespa, Some success here! I checked the FSV's and yes - the 209x were set at 1 i.e. for an external thermostat. Once I changed to zero, I coul...
Hi @jamespa The second panel of the controller with the 0 and a graph in it suggests it's operating according to water law (weather compensation). ...
@derek-m Yes 😀 - I've always had this set to deliver max heat to the UFH system, having read on other posts here that those valves are inte...
Hi @jamespa, I've attached the whole manual and also a pic of my control unit display here Thanks, Mark
Hi @jamespa (and FYI @bontwoody as it relates to your other reply), Thanks again for any help you can offer here - it really is appreciated!, Answer...
@bontwoody According to Samsung instrument panel, the "Supply water temperature to the load" (that's the samsung manual description - I'm assum...
@johnmo How do you operate the heating system, do you leave on all the time? Not exactly all the time, but I tighten up the difference in min...
@jamespa Many thanks for all this info - really appreciate it! I'll go through all points tomorrow as I'm off to bed now but re the descaling questi...
@johnmo yes correct (just dropped that in there to see who wasn't paying attention!) - thanks for spotting. Vented HW system so miserable hot water pr...
Logically, addressing hard water issues with a water softening solution seems like common sense ie to preserve good flow rates for an ASHP system, but...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Siting of the external sensor on a heatpump
OK perhaps my original statement was badly worded if ap...
By JamesPa , 18 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
You should (almost) always reject having a buffer, by w...
By JamesPa , 15 hours ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 18 hours ago
-
RE: Is it the house or the equipment?
@majordennisbloodnok I do sympathise. On the original...
By springswood , 20 hours ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 1 day ago
-
Sorry to hear about the problems, its going to be somet...
By JamesPa , 1 day ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 2 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 2 days ago
-
RE: Adventures in heat loss calculations
I have seen it stated that the declared calorific value...
By JamesPa , 2 days ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 3 days ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 3 days ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 3 days ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 4 days ago
SPONSORS
