Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 10, 2024
@misterb Ive got a 60w tube heater hooked up to a temp control plug. I will insulate and keep at around 18 C over winter.
@transparent I keep my children in there at night. Little fingers. Like 45 of them in total (fingers that is). Previous suggestion was conduit for t...
Text disappeared but I've made a start on mounting hardware and making up matched length cables. Here we are on 35mm welding cable. Rest will be in 25...
So I tested as suggested and it read 20.4 amps throughout. The voltage however stayed at 0.2v regardless of setting. I'm assuming some kind of shirt c...
Power supply is here. Turns out it comes with 4mm cables and lugs for the 20 amp connection.
@transparent will do. It is a 20 amp unit and I was planning at running just below that.
Got it. I can actually wire directly to the unit at the back and have some cable available to do so.
Ignore my last message. I have reread the post. I will make up some leads for the high power rear connections on the supply. Can I book up my own mu...
Will these do the job ok? I see a few using croc clips to a bus bar to top balance on YouTube.
@transparent bugger. Ok so current plan. 16 cells at a time in my workshop. 3.6v. Plug in, wait. With this model of bench power will I know ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: How quickly would you want/expect heat recovery to take from setback?
@jamespa I was thinking primarily of raising the flow t...
By AndrewJ , 2 hours ago
-
He's down for a bit of maintenance... I'll restore him ...
By Mars , 3 hours ago
-
RE: Why don't people choose heat pumps?
So a bunch of things rather than generate a load of rep...
By EtchedPixels , 4 hours ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
That is a good approach and an excellent result. For co...
By Judith , 7 hours ago
-
RE: Our 10 year old Grant heat pump failed
@editor @mike-patrick A 10 year old grant heat pump ...
By JamesPa , 10 hours ago
-
RE: Buffer tank on a 2 x 14kw Ecodan system
In principle I agree but for what? OP has drawn a sche...
By JamesPa , 12 hours ago
-
RE: Say hello and introduce yourself
Good to see you here, @claytonbrowne, and welcome to th...
By Mars , 15 hours ago
-
RE: Issues with Samsung heat pump – high running costs and house dropping to 11C overnight
It looks very much like a radiator balancing i...
By hml1827 , 1 day ago
-
I have, @transparent, but chose to pose the question he...
By Majordennisbloodnok , 1 day ago
-
RE: Should I change my cylinder when changing from a gas boiler to a heat pump.
@jamespa’s point about payback is a useful counterbalan...
By Mars , 1 day ago
-
If it no longer works after forgetting its settings and...
By bobflux , 2 days ago
-
RE: Plug and play solar. Thoughts?
Impressions so far from the one I've installed are that...
By EtchedPixels , 2 days ago
-
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor And as an occasional contributor, may I say wel...
By Toodles , 2 days ago
SPONSORS
