Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 8, 2025
The room temp sensor isn't inside the FTC but inside the little control panel. This comes with a long cable so doesn't have to be beside or near the ...
Are you familiar with the system? It depends how the room sensor setting is set up. This is on the menu under Initial Settings (the little cog wheel)....
It's almost unbelievable that a 14kW Ecodan can't heat a new build house, albeit quite a large one. In order for a 14kW Ecodan not to be able to heat ...
Do you have the same info for the 16kW variant? I wonder if the min values are different. Maybe the dip switches just throttle the maximum.
If it's reporting consumed/delivered energy inaccurately now, that won't change with Melcloud because it uses the same data you see on the FTC screen....
I'm happy to stand corrected, I often am!
I think you are right that cycling happens a lot but nobody noticed before. It really doesn't matter though, as long as it's not excessive. However w...
@harriup, I think your 'cycles' after 8pm or so are defrosts. The cycling you see in my recent posts is because the IAT target is being reached and...
It does sound a bit low. My DHW COP is exactly 2 for November. I run my DHW at what is normally the warmest time, 2pm. Where in the country are you...
The difference is clear. A couple of points. I'm surprised your ASHP never runs constantly. Surely at 8 deg or so it should be ticking along at about...
Derek, I'll find the numbers but it may be a day or two as I'm a bit tied up with family stuff and not at home much atm.
@cathoderay my defrosts are at 5pm, 8:15pm 6:30am and just after 9am. The giveaway is the sudden drop in LWT corresponding to a blip in OAT. I ass...
SPONSORS
Degrees of Separation
Latest Posts
-
Tragically i was a little bored and under the weather a...
By kilgorexv , 1 hour ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 2 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 2 hours ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 11 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 11 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 13 hours ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 1 day ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 4 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 4 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 4 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 5 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 5 days ago
SPONSORS
