Search with Wattson
Activity
 
Notifications
Clear all

Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!

Judith
@judith
Member
Prominent Member
Joined: Nov 28, 2023
Last seen: Jun 15, 2026
Topics: 4 / Replies: 534
Reply
RE: Replacing Worcester oil boiler with an ASHP

@julianc 190m2 and not done a full year yet on ashp. Annual gas usage ~17,000kWh but efficiency unknown. We’ve used the wood burner a similar number o...

1 year ago
Reply
RE: Widespread failure of insulation installation

Some of these documents on moisture control

1 year ago
Forum
Reply
RE: Replacing Worcester oil boiler with an ASHP

@julianc so far in January we’ve achieved 3.8 energy efficiency. Really pleased but we’ve not not a calibrated heat meter only the Vaillant prediction...

1 year ago
Reply
RE: Heat pump quotes: Advice needed

I was looking for the link about what heat could go down each microbore pipe. But I’ve been beaten to it. Your heat loss document should give the loss...

1 year ago
Reply
RE: Heat pump quotes: Advice needed

In no particular order some thoughts:- Clivet is a badged Midea and personally I wouldn’t have one given me. Since a Heatgeek trained installer sa...

1 year ago
Reply
RE: 8.2kW GivEnergy

On your first point @rosst your best best is to start with your installer, the manufacturer and dedicated forums possibly on Facebook for your type, s...

1 year ago
Reply
RE: Vaillant Arotherm ASHP gets noisier when it gets colder outside

@jamespa ours (without a noise issue) was installed in September. I too recall reading the firmware is in a hardware (not-remote programmable) chip an...

1 year ago
Reply
RE: Is My Midea Heat Pump Inherently Defective?

@cathoderay digging into further dirty details are your fully open trvs suitable for bidirectional use or are they your secondary constriction?

1 year ago
Reply
RE: Vaillant - Downstairs radiators not getting warm

@samiebon1 When adjusting lockshields its worth bearing in mind that some have a tiny range over which the adjustment makes any difference. S...

1 year ago
Reply
RE: Vaillant - Downstairs radiators not getting warm

@samiebon1 our DHW gets to 48C with a heating temp of ~55C within ~ 45mins but it’s not usually empty (residual ~35 in bottom third of tank). The la...

1 year ago
Reply
RE: Is My Midea Heat Pump Inherently Defective?

@cathoderay &@bobtskutter This is getting interesting! I was convinced from much earlier posts that the early hypothesis of the PHE being inad...

1 year ago
Reply
RE: Heat Pump starting current

@transparent to give context to my results of slow switch on current. Our Vaillant is inverter controlled, the system is open and the overall system i...

1 year ago
Page 24 / 45
Share:

SPONSORS

Join Us!

Installer Finder

Degrees of Separation

Latest Posts

SPONSORS

Click to access the login or register cheese
Protected By
Shield Security PRO