Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 17, 2026
Or the filters cleaned ... OP says upthread that he hasn't checked them!
To put into context thats 31p/kWh. According to this link gas hobs are 40% efficient and induction hobs 90%. A simple induction hob retails at arou...
Sorry my mistake, I didn't read the original post!
My feeling is that Octopus will be wanting to sort this so I wouldn't despair, instead I would be patient but firm and, as @mars says, I wouldn't pay....
FWIW the ramp with my Vaillant up occurs shortly after the cloud of vapour appears, so its during the 'recovery' phase. I have always assumed that th...
Agreed Agreed, an essential part of setting up a WC curve correctly I don't agree with this unless you want your rooms to be at 16. Assumin...
There is a thread from a year ago where this was debated at length and the conclusion, well argued imho, was flow is better but it's likely only to ma...
Yes it does, but you can disable it. Sensocomfort-Settings-Installer Level-Installation Configuration-Circuit 1-Room temp mod. Set to inactive to ru...
Check them. Filters, particularly the fine mesh filter if you have one (it may be inside the case) block up quickly. Mine blocked up to the point th...
Thanks for the info. Volumiser configuration should be OK, a little concerned the rads are original it suggests some may be undersized. OK, difficu...
As you now have a Heliotherm engineer on the case I wont comment further. As @mars says this is high end stuff, the suppliers need to be made to work...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Heat Pump deployment statistics: June 2026
To my eyes, sat behind all of this is a basic policy ma...
By Temperature_Gradient , 3 hours ago
-
Thank you @majordennisbloodnok – that means a lot, part...
By Mars , 7 hours ago
-
We’ve just passed 20 million forum views! 🎉
It's official. The Renewable Heating Hub forums have of...
By Mars , 7 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
That calculation is reasonable, output is proportional ...
By JamesPa , 9 hours ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
Have you looked at the Nibe website? They list their ap...
By Lizzie , 11 hours ago
-
RE: Why are ASHP installs so expensive?
A not unreasonable position and it wouldn’t be mandator...
By AndrewJ , 11 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 2 days ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 2 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 2 days ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 2 days ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 3 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 3 days ago
-
SPONSORS
