Last seen: Nov 12, 2023
I'm no joking, put some ice(make an (big enough)ice cube with a string in it) on the air temperature sensor at the back of the unit, and watch what it...
That's why I've posted the link of the system with the date in the picture.
I can only say that one comment regarding the AA not needing the WC curve to be set, stems from this mitsubishi document that I've shared(photo as wel...
edit wrong info, maybe this?
Use translate in browser. 1./p> 2./p> 3/p> 3. 4./p> 5./p>
New Ecodan 11kW UFH, similar data.
@derek-m if you skim through this Samsung doc, you will see details how a double compressor "heat pump"/AC works, some of this data is pointless to an...
@bontwoody did you size it right? last 8-9 days, zero cycling.
If your flow rate is about 25l-30l/m then that would be a normal behavior given that you are reheating an empty UFH. This 6kW ecodan was doing somet...
- 21 Forums
- 1,760 Topics
- 37.6 K Posts
- 87 Online
- 2,052 Members
Join Us!
Latest Posts
-
RE: Samsung E911 intermittent issue
@netdonkey is this system only 6 month old? If you y...
By ASHP-BOBBA , 29 seconds ago
-
RE: Battery...Full house back up
Where is you distribution board? In the I would have ex...
By JohnR , 3 minutes ago
-
RE: Samsung ASHP scheduling help
All this is far too complicated for most of us. Surely ...
By Broadsman , 32 minutes ago
-
RE: Fitting heat pump plumbing and pipes in advance?
One more thought if you are doing a bathroom refurb and...
By JamesPa , 57 minutes ago
-
RE: Fitting emitters with output greater than room heat loss.
The proof, of course, will be in the heating! My ASH...
By JamesPa , 1 hour ago
-
RE: Which system is most efficient...
OK. Im not going to be able to answer the question, bu...
By JamesPa , 1 hour ago
-
-
RE: Noise problems with newly installed Samsung 8kW ASHP
@lokisam I am following this with interest as I also ha...
By Odynsfee , 11 hours ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@thundermink can you give us an update on your tests?
By Mars , 13 hours ago
-
RE: Smart meter installation – seamless or a potential nightmare?
That's a very useful photo @jancoldIt provides me with ...
By Transparent , 14 hours ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
@editor Yes, it's their "Aira Generation 1" 8kW model: ...
By trungdong , 15 hours ago
-
RE: Samsung heat pump has arrived with damaged fins – do I accept it or send it back?
Hi guys thanks for the replies. So it seems when the...
By AdamC001 , 17 hours ago
-
RE: Reducing heat pump vibrations through flat roof
@patrickvito Hi Patrick, thanks so much for taking the ...
By sten_super , 23 hours ago
-
RE: Noise Issues with our Ecodan 8.5kW WM85VAA air source heat pump
@athlonoc Its unlikely the FTC is controlling a 3rd par...
By ASHP-BOBBA , 1 day ago
-
RE: Mitsubishi Ecodan Produced energy showing 'INVALID'
Hello! I tried your idea and disabled the cooling funct...
By sorin , 1 day ago
-
RE: What should we do with our Aga?
@RobinBennett We also have an AGA. Oil fired that we...
By Morgan , 1 day ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@editor Many thanks Mars, this will be my Christmas rea...
By Odd_Lion , 1 day ago
-
RE: Anyone have experience with Clivet (Midea?)? And monoblocks vs Splits?
@benson Good to hear!
By bigvibes , 2 days ago
-
RE: Very noisy Daikin Altherma
@editor I did not find a solution, and have pretty much...
By Zogy , 2 days ago
-
RE: Getting the best out of a heat pump - is Homely a possible answer?
@profzarkov Hi, the problem I had when fitting my Homel...
By Potatoman , 2 days ago
Latest Topics
-
By Jeff 3 hours ago
-
Which system is most efficient...
By bigvibes 2 days ago
-
What should we do with our Aga?
By RobinBennett 2 days ago
-
Reducing heat pump vibrations through flat roof
By sten_super 2 days ago
-
Fitting heat pump plumbing and pipes in advance?
By RobinBennett 2 days ago
-
By Broadsman 2 days ago
-
How to Clean a Y-Strainer Filter
By Mars 2 days ago