Last seen: Dec 15, 2025
@deltona Sorry to have mis-read your post and intentions but you did mention hasty installations etc. This is why I rarely post on forums, too many ...
@majordennisbloodnok Thank you for that. My answer was light hearted sarcasm, OK, lowest form.... and, as I said, not meant to be offensive in any...
@toodles Don't wish to be offensive but what a silly question. It is obviously for the benefit of contractors, numerous layers of bureaucracy, and all...
@deltona Agree that contractors grabbing ECO4 contracts, speed, no time to understand what you have agreed to. So called tradespeople move into your h...
@jamespa Thank you once again. If I was able insulation problems would have been fixed by me but then I wouldn't have needed ECO4, tank would have bee...
@jamespa Thank you taking time to help. I have read so many posts, watched and listened to discussions and become more and more confused. So many capi...
@jamespa It makes sense to keep ASHP but no idea how it works, how to operate economically. Not long ago I would have enjoyed learning all about it,...
@jamespa Should have added I have paid for cable to be made safe by having chimney repaired and lined. It needed to be done so that I could safely hav...
@jamespa Told that solar panels and ASHP are same contract, can't have one without the other.
@editor Thank you for reply, it has cheered me up. The charity, don't want to name, told me to allow contractors to remove installation even though ...
This afternoon I was advised by a charity that was helping me with my ECO4 dispute that I should agree to let contractors remove ASHP and solar panels...
@bart Thanks for your help but I have already been there. Contractor is saying, with some truth, that I won't engage with them. Disputes Resolution sa...
- 26 Forums
- 2,396 Topics
- 54.3 K Posts
- 407 Online
- 6,077 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In my case it was a very specific pattern of behaviour ...
By Sheriff Fatman , 10 minutes ago
-
RE: Vaillant aroTherm not heating with many faults
@ashp-bobba Yeah I'll give it a go, will check filter...
By Anon67 , 19 minutes ago
-
@majordennisbloodnok it has been a few weeks since addi...
By TechnoGeek , 20 minutes ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@transparent Perhaps the names at the end of the docume...
By Toodles , 30 minutes ago
-
RE: Predicted Heat Loss & Needs from MCS calcs vs EPC vs actual
COP of 3 perhaps a little low and you say that you don'...
By benson , 1 hour ago
-
RE: Heatpunk Floor plan issues
@jamiejones85 A2A they will design on dynamic heat loss...
By ASHP-BOBBA , 1 hour ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
I think the concern was about crud being forced from th...
By iotum , 1 hour ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
The usual type of underground cable with a metal 'outer...
By Transparent , 1 hour ago
-
RE: Rate the quality of your heat pump design and installation
Welcome to the forum and I am sorry you are disappointe...
By JamesPa , 1 hour ago
-
RE: Fan unit Making terrible noise HELP!!
can you post a video looking inside, at and through the...
By ASHP-BOBBA , 2 hours ago
-
RE: Setback savings - fact or fiction?
Excellent graphics and description Rob…. But to my mind...
By SUNandAIR , 3 hours ago
-
RE: Heat pump not reaching flow temperature
@davec Ive had a look at the screenshots. Lots of th...
By JamesPa , 14 hours ago
-
RE: Power outages and storms: A surprisingly good DNO experience
Agreed, which is no more nor less than a customer shoul...
By Majordennisbloodnok , 19 hours ago
-
RE: Running from backup generaor in powercut?
@batpred In our case, 3 times each day when the Octopus...
By Toodles , 19 hours ago
-
RE: New Fogstar 15.5kWh upright solution
@batpred Here's the latest Fogstar ready built pack....
By Bash , 21 hours ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
Solis confirmed that the S6 works with a single battery...
By Batpred , 22 hours ago
-
RE: Who has a V2G EV installation
I am wondering if in any V2X, would the car battery eve...
By Batpred , 23 hours ago
-
RE: New Mitsubishi Ecodan 11.2kW installation - L9 errors and maybe more
OK. I think your system, which seems well designed, is...
By JamesPa , 1 day ago
-
RE: Fan is clipping ice build up from the front of unit.
@majordennisbloodnok I’ll not go there thanks! Toodles.
By Toodles , 2 days ago

