Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 27, 2026
That's the problem with the UK, in comparison with America for example or Germany. However, as long as the owner/consumer keeps all the information an...
Going back on the subject of our heat pump, in the spirit of keeping everything transparent and documented. In mid-September 2025 I submitted a Subjec...
One thing I have been doing, is creating watchdogs for my automations, listening for 2 minutes, so if something hasn't changed, it will retry...
I love Necromancy... but to follow James, heat pumps WILL heat your water and radiators even if you don't feel it, the difference between a system swi...
12kW Gen 6 AE120BXYDEG (currently NOT performing well and in process of initiating remedial work)
Agreed, but when you spend a substantial amount of money on a system, expecting it to be fit for purpose and is not. Someone IS accountable, ...
This is my current set-up, with some experimental things running in other views: And this is my Heat Pump experimental part: ...
Yep, and this happens daily on my side, as my routers are set to go offline over night a few hours. Give us a bit of WiFi free environment, n...
This is my code, I put it straight into the configuration.yaml Honestly, I am not that bothered by this, as it's just me playing around and learning...
At this point, I will work on refining the code. But ignore it for now, as this is me writing code, to work out the two different usages and ...
Part of the remedial work, whenever I get the green light and it commences, I will ask the installers to replace the fuses on the heat pump w...
Good to know, if you have a look at that screenshot you might be able to see, hot water hit a maximum of 4.68kW and heating it reached 5.5kW....
- 27 Forums
- 2,767 Topics
- 65.2 K Posts
- 1,541 Online
- 7,169 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
My guess is that if you do nothing, Octopus will contin...
By Old_Scientist , 2 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 3 hours ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 4 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
I suspect it's a deliberate decisi...
By JamesPa , 6 hours ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 6 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 15 hours ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 22 hours ago
-
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 2 days ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 3 days ago
-
No, but the heat pump must be capable of delivering a S...
By JamesPa , 3 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 4 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 4 days ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
booked it with Vaillant. will use them until i can find...
By AdamK , 4 days ago



