Last seen: Sep 19, 2024
@ecodannewcastle Do I understand correctly that you are operating your system with a fixed LWT? If so, then lower the setting by several degrees and...
Hi Dave, If the rooms are too warm this would indicate that the WC slope is too high for your home. I would suggest adjusting the cold end to a LWT ...
You have partially answer the question yourself, in that it has been working fine for 14 months without making any noise, so I don't think that the ac...
If problems were to occur in the future, could MVHR help to resolve them?
It would appear that auto adaptation was actually 'adapting' to the adverse weather condition. 😎 Well done Mitsubishi. 😀 Would you care to name you...
@davew I have attached a copy of a very detailed Ecodan manual kindly provided by Kev some time ago. I would suggest that you make a note of all t...
The first thing that I would suggest is setting your system to operate in Weather Compensation (WC) mode with the following settings, LWT of 50C at ou...
Hi Dave, Welcome to the forum. If you have been operating your system in auto adaptation mode for 4 years, have you always experienced cycling? Wa...
I'm not an expert when it comes to insulation, so I would suggest that you talk to a suitable company. Though more expensive, external wall insulation...
Who is the manufacturer?
@kev-m It will be interesting to see what actually happens, and how well the controller actually 'learns'.
The most important factor is to ensure that the design and commissioning are done correctly, which will then mean that the optimisation is much easier...
- 26 Forums
- 2,378 Topics
- 53.9 K Posts
- 311 Online
- 6,060 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Optimum new build house design for Heat Pump
A single design temp of 35 or less really would be the ...
By JamesPa , 22 minutes ago
-
One school of thought says put almost nothing in and in...
By JamesPa , 29 minutes ago
-
@sunandair we operate a very similar overnight setback ...
By Old_Scientist , 2 hours ago
-
RE: Radiator sizing sanity check
The nominal will be the flow rate for rad dt5 at full o...
By JamesPa , 3 hours ago
-
RE: Cascade 2x Grant Areona 10kw ASHP - Ongoing setup issues
@adam That all sounds very sensible and I agree with...
By JamesPa , 3 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
This is what my auto adapt script does. It also covers ...
By cathodeRay , 5 hours ago
-
RE: Grant ASHP 17.5 kw. weather curve
@chinkoa Sorry there are two separate thoug...
By JamesPa , 19 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@transparent As easy as putting sparklers in champag...
By Papahuhu , 19 hours ago
-
@f1p Looks good, and will likely be something I use whe...
By Sheriff Fatman , 22 hours ago
-
RE: The Great British Heat Pump Owner Persona Survey: Let's Build Our Archetype!
@mosibi, go on then, complete the survey. Let's get the...
By Mars , 1 day ago
-
RE: Water Hammer After Heat Pump Install
@jaynieq I wish you luck with this one. I think the ma...
By JamesPa , 1 day ago
-
RE: Weather compensation- why you should use it
As good a place as any to drop this video:/p>
By Mars , 2 days ago
-
RE: Forum updates, announcements & issues
@transparent D'Oh - I did look before I posted but I mi...
By dr_dongle , 2 days ago
-
Compatibility with Samsung AE080RXYDEH
I am new to all this. We have a SamsungAE080RXYDEH that...
By John999 , 2 days ago
-
RE: New Fogstar 15.5kWh upright solution
@batpred Maybe you should buy your additional batter...
By Bash , 2 days ago
-
RE: Data Accuracy Problem: Daikin 8kW Heat Pump's Onecta App vs MMI Power Consumption
@nursethescreens Yes, comfort and happiness of the fami...
By Toodles , 2 days ago
-
RE: Connecting Growatt SPH5000 over wired ethernet rather than wireless
Thanks folks. I had tried googling an ethernet lab adap...
By z8lccda , 3 days ago
-
RE: Changing from 4-port buffer to volumizer
@toodles I'm not concerned that the behaviour is not no...
By Andy1618 , 3 days ago
-
-
RE: Setback savings - fact or fiction?
I agree, and I think there are two things in play here....
By cathodeRay , 3 days ago


