Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 28, 2026
It is bonkers. Especially when the plumber says oh donāt have too big a difference between off and on temps on the zones keep to 2C diff. Sometimes ke...
@mikefl thanks Mike. Can confirm 4 works as expected. Only 2 of the 3 zones have lights on the valves but when hot water mode comes on can see ...
Itās all rather frustrating. Far as I know Grant specifiy the use of a LLH. Thankfully Iām in a āfortunateā unfortunate position. The contract f...
Iām thinking back through the last couple months. If a valve closure could cause this issue of flow being insufficient or its primary flow v secondary...
Yeah I donāt see it being useful at this point lol. Especially as the ASHP is running at 50c and Iām not getting that through. Cost to heat ratio is h...
So no change in heating over night. seems the 3am-4am hot water run worked as thatās sitting at 45c 3.5 hours later. So least we have that. ...
Apologies for string of posts but putting down findings soon as I have them. as was messaging plumber changed second pump speed up one. That then se...
Plumber is going to contact Grant it seems. Just very odd only top left pipe to LLH is hot. All other pipes cool to touch. Canāt workout where t...
No chance of heating. Top left pipe not getting heat whatsoever. Which explains why rads never warm. Itās been nearly 3 hours so Iād expect some rise ...
Yeah not quite sure whatās going on with the flow. Interestingly now Iāve been given more of a tour the flow rate is on the bottom right from the bott...
So no call from Grant yesterday. So I rang up this AM and was told if engineer visits Monday and itās not manufacturer fault itās Ā£150 plus Ā£60 an hou...
Plumber's been. Changed fuse for hot water panel, nothing going to it, so that's now on the electrician to come. I asked about the valves closed -...
- 27 Forums
- 2,827 Topics
- 67.2 K Posts
- 2,715 Online
- 7,246 Members

