Last seen: Mar 5, 2025
@webcmg Pretty busy at the mo and also getting solar + battery installed so not been paying attention to heat pump. We had family staying so had to t...
@webcmg Once you get your insulation sorted it sounds like you're on the right track, our room temps are a more comfortable >=21ºC Here's our Ja...
@webcmg I don't get the Vaillant external Temp entity with my HACs so will rely on Openweathermap for now, not sure why, maybe because my external sen...
I've got two Ambisense TRVs in our two coldest rooms. They're smart enough to increase the flow temp on the Arotherm+. I've also got two cheap Chine...
@webcmg What integration are you using for the outdoor temperature? I've just added OpenWeatherMap to try and get these values but not sure if they'...
@webcmg Here you go. What's your average flow temp now you've lowered the Heat Curve to 0.4?
@webcmg Our setup doesn't have anything like that, our Arotherm+ is connected to a Vaillant uniSTOR 300Ltr Unvented Cylinder with two or three other b...
@cathoderay Those stats came from SensoApp and Home Assistant. I'm not sure how accurate the SensoApp stats are but I'm sure there's room for my setup...
@webcmg Here you go. November December
@webcmg Our house is a recent self build, timber frame with block, K-rend rendering, and part wood cladding. We're fairly well insulated and had to do...
@webcmg Where did you get stuck when trying to use the heat curve? The diagram from the manual shows what the flow temp will be dependent upon the out...
@webcmg Not sure if I have one. Is that the pump attached to the UFH manifold/mixer? Your Flow temp is nearly 40ºC which probably explains why you'...
Latest Posts
-
As mentioned in other forums when 2 x 10kw grant aerona...
By bretix , 2 hours ago
-
RE: Effect of Mitsu PAR WT60 Wireless Controller
Hi David, If your Mitsi is still on weather compensa...
By RobS , 4 hours ago
-
In most cases I'd expect such liability would be tested...
By Transparent , 6 hours ago
-
RE: Say hello and introduce yourself
This discussion has gone quite deep for our Hello &...
By Transparent , 6 hours ago
-
RE: Midea ASHP – how to set weather compensation
@pash44pump - it sounds as though you are close to havi...
By cathodeRay , 7 hours ago
-
Let's see if we can tempt @glyn-h to give his insights....
By Mars , 8 hours ago
-
RE: New Fogstar 15.5kWh upright solution
I should've read further before posting the above. ...
By Transparent , 9 hours ago
-
RE: Question about Heating Pump Operation mode – Ecodan FTC6 v20.06
This isn't an exact reply to your question, as I don't ...
By rhh2348 , 9 hours ago
-
RE: Daikin Octopus installation update - I saw my first defrost. 😍😂
@radwhisperer It does seem to occur most loudly the mor...
By Jancold , 10 hours ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
Let's first note what those parameters are. They are ...
By Transparent , 11 hours ago
-
I’ve met the Flexi-Orb team, and they come across as ge...
By Mars , 11 hours ago
-
Webinar on "Heat Pumps for Home Owners" Thursday 20...
By Mars , 13 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@grantmethestrength also i need to check the other stra...
By AdamK , 14 hours ago
-
@jamespa @old_scientist @iaack Hi, thanks for the inp...
By bontwoody , 14 hours ago
-
RE: Should Our Water Circulation Pump Be Configured to Run All The Time?
This is how Daikin run their heat pumps. Weather Comp...
By RadWhisperer , 17 hours ago
-
Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
I ended up with a Solis S6-EH1P8K-L-PLUS (8 kW) hybrid ...
By Batpred , 1 day ago
-
RE: Options on flushing my system
@grantmethestrength with your pragmatic approach and &#...
By SUNandAIR , 1 day ago
-
RE: Samsung Heat Pump – Can't Activate TW2 Pipe Sensor (for Delta T Control)
@batpred For the moment I'm sticking with what I have, ...
By bubuontheweb , 1 day ago
-
RE: Electricity price predictions
Nice to be back on track! If we all had the interest, s...
By Batpred , 1 day ago
