Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 1, 2026
Please do try to concentrate! I clearly use the wired controller, plus the modbus interface to it, the latter mostly for monitoring, but also to imple...
@mk4, @tasos — None of it really makes any sense! Despite, not because of, my FOR SERVICEMAN settings as above, I am definitely running in weather com...
@tasos — my head is beginning to hurt! I can't really make any sense of that paragraph! The two manuals I have for my unit aren't really any clearer. ...
I agree (see my image and comments above), and the point I was trying to add is that it becomes meaningless when you have weather compensation on. Wit...
Or at times like a one armed bandit for left handed players. Maybe the joke is meant to be on us! On my unit, the room temp is set using the cent...
@mk4 — it has certainly changed a lot in appearance in a few years! Mine is greyscale, text plus some icons. Yours also has more of the latter, I don'...
Can you post some photos of your wired controller, if possible where you entered these settings. I am beginning to wonder if you have a different cont...
I think the key thing is we are using fundamentally different approaches, which is a good thing, each method provides a check on the other. Using the ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: 7kW EV Charger Options Advice
I have installed an EVSE. I'm French, so I have no idea...
By bobflux , 10 minutes ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
OK. If you had two different flow temps and were going ...
By bobflux , 2 hours ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 3 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
Possibly useful to look at 3 months Jun, Jul, Aug and c...
By Tim441 , 4 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@kilgorexv definitely a larger inverter will help and m...
By AndrewJ , 2 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
The installation is almost done! I've written up two ...
By tomasmcguinness , 2 days ago
-
RE: Glass lined Cylinder for private water supply
This has turned into a fascinating little rabbit hole. ...
By Mars , 3 days ago
-
RE: Switch suitable to change between two inverter CT's
Last winter my battery ,32KWh, could run the house com...
By Jancold , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Agree with Major. And even if I was very happy with ...
By Batpred , 3 days ago
-
RE: Is the "divide by 2900" rule still valid?
There is another estimator that you could use, a formul...
By Rob of York , 3 days ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 5 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 6 days ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 6 days ago
SPONSORS
