Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 9, 2026
@derek-m - Home Assistant is a nightmare, from start to finish. It is only the fact that after bludgeoning it into shape, it just might do something u...
I think I may have discovered - totally by accident - what corrupted the Home Assistant database. The corruption happened at 2023-02-11 04:12:00.459. ...
@derek-m - yes, this is similar to what I have been doing, but always better to have two brains working on this sort of problem. I've added a few more...
Hear hear, and, in fact, I think you are both right. All @derek-m is doing is pointing out you may not be running your system optimally (and for what ...
As you posted that, I was writing a post with a link to his post on Legionella. It is a good post, well researched, considers most eventualities, incl...
Thank God we haven't reached that state of coercive healthism yet, though it has to be said that that blasted pandemic and worse, the authorities resp...
Sorry, should have said 'providing some end user service', their customers strictly speaking are the installers.
Thanks for the update, that is useful to know. Also good to note Freedom actually providing some customer service.
That is interesting, it doesn't look like a standard Freedom based installation (using their blue installer's guide), and unlike the Freedom based ins...
They would, wouldn't they. It's worth googling whether you really need a Legionella cycle in the first place.
@filipe - sorry to hear you have had a bumpy ride but as you will have read elsewhere on the forum, this is not unusual. I did try running with a fi...
@timmcc - I've been through the HA installation guide and based on the table below from HA's documentation, and the fact the 'Supervised' version on L...
SPONSORS
Degrees of Separation
Latest Posts
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 3 hours ago
-
RE: Vaillant Aurotherm - Heater Wire Position
I have a recent Pro model. It has a condensate drain at...
By Batpred , 4 hours ago
-
RE: Adventures in heat loss calculations
At this point its probably worth pointing out, for futu...
By JamesPa , 6 hours ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 9 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 1 day ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 2 days ago
-
Thank you @trebor12345
By rgabor , 2 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 2 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 2 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 3 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 5 days ago
SPONSORS
