Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 9, 2026
I did say '"That process [observe > analyse > observe] is at the core of experimental science. [emphasis added]". Perhaps I should have added a ...
I agree, and that is pretty much what we did in the old days, only we didn't call it a model, we called it fitting an equation, or whatever. The cycli...
@derek-m (and @jamespa) - I agree models definitely have their uses when used sensibly, but I fear these days far too many people believe models are t...
I note with interest that model is now in quotes! I still think the best way to 'model' the effects of on/off running is by using observational data, ...
I was a beneficiary of the so-called LAD or local authority delivery version of the Green Homes (or whatever it was called) grant system. Delivery of ...
Possibly, but unlikely. The grant administrator's preferred installer was a dedicated renewables firm. The main problems were a worse than useless roo...
@marvinator80 - apologies accepted, thank you, think no more of it. I agree planning and installing a heat pump, and more in your case, can be a very ...
@marvinator80 - OK, and I am glad it has all worked out well for you.
You are correct, they aren't, mine is an old leaky building, yours is a modern build. I apologise if I came across as all fired up, I don't actually f...
You are right, but unfortunately I have cross-posted. I am not sure why, because I am usually one to make a point of not pouring petrol on the flames.
@marvinator80 - you keep on responding to points I haven't made. I have never told you how to run your system. All I have said was that your initial s...
That is a curious spin on being mislead and some might even say the phrase 'chosen to be misled' is something of an oxymoron. Perhaps a better term fo...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Adventures in heat loss calculations
@jamespa and @rob-of-york ā thank you both very much I ...
By cathodeRay , 20 minutes ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 1 hour ago
-
Interesting also to see his comment on the heating indu...
By JamesPa , 1 hour ago
-
Vaillant Aurotherm - Heater Wire Position
I wanted to check the actual position of the Heating Wi...
By trebor12345 , 2 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 1 day ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 1 day ago
-
Thank you @trebor12345
By rgabor , 1 day ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 2 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 2 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 2 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 5 days ago
SPONSORS
