Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Dec 18, 2022
@derek-m There is a honeywell thermostat system with a remote control which is talking to the system to set the temperature. The radiators themse...
@heat-pump-newbie Hi, pictures of outside unit label and the two labels on the inside unit in airing cupboard. Thanks for the advice so far.
The other thing I've noticed is that the flow rate seems to go up much higher when it appears to switch on and off. What I mean is, just now it was ...
@heat-pump-newbie thanks. It was heating the radiators not the hot water. Sticker on heat pump says; Daikin Europe EDLA11DA3V3 Is that what you ...
@derek-m Thank you - I think you are all on to something here. This morning it was whisper quiet (bliss) - I took three photos and it got qu...
Thank you - this is the info it displays, though it changes the flow rate etc., all the time. I don't know what the right rate should be.
@derek-m thank you
@derek-m thank you. Holding it makes no difference. The noise is the water going round all those new hot pipes they've installed in the airing cupbo...
@derek-m Thank you. Yes black object is the thing that switches water from hot water to heating. Not sure what large tank is for, so I expect you a...
@derek-m Yes, I topped it up and the installer has been back since to deal with a fault that occurred with disinfection. It's currently at about 1.7b...
I don't think there's a separate pump - I think its pump outside, buffer, tank and pressure vessel inside.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
I am amazed that there is not something out there to me...
By JamesPa , 4 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 9 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 14 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 4 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 5 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
