Forums

Forums
Renewable Heating
Thermostats, Volumi...
Ecdon Third party T...
 
Notifications
Clear all

Ecdon Third party Thermostat Issues

 
Page 2 / 2
Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
Last Post by Kev M 2 years ago
14 Posts
3 Users
0 Reactions
3,327 Views
RSS
 adam_colwell
(@adam_colwell)
Trusted Member Member
Joined: 2 years ago
Posts: 21
Topic starter 06/08/2023 5:58 pm  
  1. @derek-m yeah its since the cooler weather has arrived, the controller is located in airing cupboard upstairs. The door is closed and there is no radiator in the cupboard.

This post was modified 2 years ago by adam_colwell

   
ReplyQuote
 Kev M
(@kev-m)
Famed Member Member
Joined: 5 years ago
Posts: 1276
06/08/2023 9:50 pm  

Posted by: @derek-m
↑

Posted by: @adam_colwell
↑

If the thermostat have been wired incorrectly, is a hard job to fix? 

It is quite some time since I explored the delights of the Ecodan manual, but I think that Kev is correct that there may be DIP switch settings that need to be made or that equipment may need to be enabled. I would suggest that you have a look through the 'installer settings' to see if any changes need to be made.

 

@Derek-m, if you look at the dip switch settings in 5.4 of the FTC6 manual, it says how to set the logic for the 3rd party thermostats.  If these were set wrong it could possibly cause issues like @adam_colwell is having.  Another thing to look for is a 3 way valve stuck or not set up properly. 

 



   
ReplyQuote
Page 2 / 2
Forum Jump:
  Previous Topic
Next Topic  
Topic Tags:  Thermostats Ecodan Airsou (1) ,
Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

 No online members at the moment

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →