Notifications

Clear all

[Sticky] Say hello and introduce yourself

Mars · 2021-03-02T10:01:30Z

If you're new to the forums, we'd like to take this opportunity to welcome you. Please introduce yourself by telling us a bit about yourself and where you're based.

Page 46 / 103 Prev Next

Introductions, Forum Rules & Updates

Last Post by Transparent 3 weeks ago

1,234 Posts

254 Users

712 Reactions

217.5 K Views

RSS

bontwoody

(@bontwoody)

Noble Member Contributor

Joined: 4 years ago

Posts: 850

05/04/2023 6:54 pm

@saecula-saeculorum You may find this useful, i did https://energy-stats.uk/what-size-heat-pump/

As for drilling for a GSHP I doubt the small increase in efficiency would be worth the extra cost compared to an ASHP

House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60

ReplyQuote

redbuzzard

(@redbuzzard)

Eminent Member Member

Joined: 3 years ago

Posts: 18

05/04/2023 6:58 pm

@saecula-saeculorum
Have you considered MVHR? Assuming you haven't done the ceilings yet, it shouldn't be expensive in the context of a 'new' build. Ours cost £5500 out of a total build cost of c. £400k. It manages humidity very well and I can't imagine ever having a condensation problem. Whilst it uses some energy, the heat recovery should more than offset the cost. It also means your house can (and should) otherwise be relatively well sealed. I think it's probably the best value feature we put in the house.

2021 built 2 storey detached house, 212 sq.m. / 2300 sq.ft. heated area. EPC 87B. Mitsubishi Ecodan 11.2Kw ASHP, weather compensated flow temp, UFH, MVHR.

👍

ReplyQuote

saecula saeculorum

(@saecula-saeculorum)

Active Member Member

Joined: 2 years ago

Posts: 10

05/04/2023 7:06 pm

@bontwoody Great thanks!

Will read up on this!

ReplyQuote

Transparent

(@transparent)

Illustrious Member Moderator

Joined: 4 years ago

Posts: 2474

05/04/2023 7:07 pm

Posted by: @bontwoody

↑

As for drilling for a GSHP I doubt the small increase in efficiency would be worth the extra cost compared to an ASHP

Ah... but this site is in Cornwall. 😎

There are a number of good reasons why GSHP installations are proportionally higher in Kernow than on the eastern bank of the Tamar.
Local knowledge is really important when investigating the possibilities for borehole, trench or mine locations of the collector pipes.

The most highly-regarded GSHP manufacturer, Kensa, are situated right at the Western end of the county.
You can be sure that they're not there due to ease of access to customers across the UK!

@saecula-saeculorum - can you give us a better idea of which end of the peninsular you're at?
The nearest market-town would be good enough.

I'm in West Devon, with views across to Bodmin Moor.
And I'm a self-builder with fair knowledge of local materials and the Building Regs.
So I have a good idea as to what's possible in the area.

This post was modified 2 years ago 2 times by Transparent

Save energy... recycle electrons!

👍

ReplyQuote

redbuzzard

(@redbuzzard)

Eminent Member Member

Joined: 3 years ago

Posts: 18

05/04/2023 7:08 pm

Posted by: @saecula-saeculorum

↑

Out of curiosity how do you find the noise levels of your ASHP?

We are never aware of the 11kW Ecodan when we are inside, or out for that matter. My neighbour's house is 6 metres from it, and he hasn't remarked on it at all.

2021 built 2 storey detached house, 212 sq.m. / 2300 sq.ft. heated area. EPC 87B. Mitsubishi Ecodan 11.2Kw ASHP, weather compensated flow temp, UFH, MVHR.

ReplyQuote

saecula saeculorum

(@saecula-saeculorum)

Active Member Member

Joined: 2 years ago

Posts: 10

05/04/2023 7:08 pm

@redbuzzard Hi there - never heard of it but will defo look into it.

We actually have yet to decide on insulation per se, so looks like I'm asking here at the right time as people are supplying so many useful pointers!

Thanks!

ReplyQuote

saecula saeculorum

(@saecula-saeculorum)

Active Member Member

Joined: 2 years ago

Posts: 10

05/04/2023 7:10 pm

Posted by: @redbuzzard

↑

Posted by: @saecula-saeculorum

↑

Out of curiosity how do you find the noise levels of your ASHP?

We are never aware of the 11kW Ecodan when we are inside, or out for that matter. My neighbour's house is 6 metres from it, and he hasn't remarked on it at all.

Great to hear! Or not as the case may be!

👍

ReplyQuote

saecula saeculorum

(@saecula-saeculorum)

Active Member Member

Joined: 2 years ago

Posts: 10

05/04/2023 7:14 pm

Hi Transparent,

We're between Penzance and Lands End sitting on good ol' fashioned Cornish granite, which is also precisely what many of the older houses here were built from!

Thanks!

ReplyQuote

Transparent

(@transparent)

Illustrious Member Moderator

Joined: 4 years ago

Posts: 2474

06/04/2023 7:49 pm

That's a lovely spot to live. Did you remember to set your watch back 50 years? 😉

You really ought to book a visit to meet the team at Kensa Heat Pumps TR4 8RJ
That's about 40mins east of you.
Ring first, and tell 'em you'll be there drekly.

Save energy... recycle electrons!

ReplyQuote

saecula saeculorum

(@saecula-saeculorum)

Active Member Member

Joined: 2 years ago

Posts: 10

07/04/2023 11:16 am

Posted by: @transparent

↑

That's a lovely spot to live. Did you remember to set your watch back 50 years? 😉

You really ought to book a visit to meet the team at Kensa Heat Pumps TR4 8RJ
That's about 40mins east of you.
Ring first, and tell 'em you'll be there drekly.

Thanks! I’ve already emailed them so should hear from them soon!

The pace of life is significantly slower here usually alright, although the summer months are quite busy!

ReplyQuote

Steevjo

(@steevjo)

Trusted Member Member

Joined: 2 years ago

Posts: 42

08/04/2023 9:07 am

Hi,

Great forum - wish I'd found it months ago!

14kW Mitsubishi Zubadan ASHP - 18 new radiators, 250L hot water tank

4.5kWp Solar PV with 3.67 kw Inverter - installed post FIT

13.5kWh Tesla Powerwall

EV - so can get Octopus Go EV charging tariff

Home Assistant on RaspberryPi keeping an eye on things!

Best to all

Our experiences with solar pv, ASHP, battery, and EV: ourhomeelectric.co.uk

👍

ReplyQuote

Transparent

(@transparent)

Illustrious Member Moderator

Joined: 4 years ago

Posts: 2474

08/04/2023 9:24 am

Welcome @steevjo

Interesting see you're using Home Assistant on RPi.
You might want to read the discussion on Connecting Home Assistant to Midea Heat Pump, which raises questions about using that approach...
... and is starting to deliver a possible solution.

Save energy... recycle electrons!

👍

ReplyQuote