What is the maximum output of the Vaillant 7kW Arotherm Plus
Data badges are performance labels for heat pumps that show how much heat they can produce at different outdoor temperatures. For example, a heat pump might output 8 kW at 7C but only 5 kW at -3C. These numbers are crucial because they tell you how well your heat pump will perform in different weather conditions.
Since you have a Vaillant 7 kW Arotherm Plus. At 7C, it should output around 7 kW, which is its rated capacity. At -3°C, the output drops to about 5.5–6 kW, depending on settings.
Your heat loss is 5.58–6.8 kW, so the Arotherm Plus should be able to handle most of your heating needs. However, during extreme cold (e.g., below -3C), it might struggle to meet the upper end of your heat loss (6.8 kW), and you might need to rely on backup heating during those cold snaps.
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
According the the Vaillant app, my 7kW Arotherm+ produced 7.6kW when the outside temperature was -7C.
Posted by: @adamkwhat is the max this HP can output? are they under the rating or over?
heat loss on my property is 5.58kw-6.8kw depending on surveyor.
There is a table here showing figures generally well above 7kW
However there has been recent speculation that these figures are gross output and do not take into account defrost cycles (which, if it is the case, is rather misleading).
https://community.openenergymonitor.org/t/vaillant-maximum-output-capacity-testing/27221
https://community.openenergymonitor.org/t/vaillant-maximum-output-capacity-testing/27221/62?page=4
It might be wise to ask the question explicitly of Vaillant Tech support if you are marginal. They are generally very helpful at least in my experience.
My heat loss is 7kW (or 16kW if you believe two surveyors!); the 7kW Vaillanthas worked for me in practice, Ive only had it since November though, design OAT-2.
4kW peak of solar PV since 2011; EV and a 1930s house which has been partially renovated to improve its efficiency. 7kW Vaillant heat pump.
Thanks all. Think it should be ok. If not I’ll start upgrading rads in cold rooms.
On the Vaillant app our 7kW showed9.1kW at ~+2C. I suspect that is a bit on the high side of the measurement accuracy though.
@adamk your surveyor may suggest radiator changes for some rooms, but but you can decline.
2kW + Growatt & 4kW +Sunnyboy PV on south-facing roof Solar thermal. 9.5kWh Givenergy battery with AC3. MVHR. Vaillant 7kW ASHP (very pleased with it) open system operating on WC
- 22 Forums
- 2,087 Topics
- 46 K Posts
- 44 Online
- 3,379 Members
Join Us!
Trusted Installers
Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.
✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available
Latest Posts
-
RE: Mitsubishi Ecodan Fails to Heat Water despite temperature drop
Hep. Max drop is 10C. Tried changing and it 5C made no ...
By m1kegibson , 7 minutes ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@jamespa Hi, No major issues just learning to live...
By DowallyDrifter , 2 hours ago
-
RE: Solar to power Heat Pump for DHW
I was going to ask what model of Growatt inverter you h...
By Majordennisbloodnok , 3 hours ago
-
RE: Commencing on an ASHP Installation Process
Quick progress update. It looks like there are only 2 ...
By Sheriff Fatman , 6 hours ago
-
There are DHW tanks with a built in heat pump that take...
By JamesPa , 16 hours ago
-
RE: Vaillant AroTherm Plus 7kW
If the thermostat is connected to the call for heat ter...
By JamesPa , 24 hours ago
-
RE: Renewables & Heat Pumps in the News
Yes I realise I'm picking this up a week late...... but...
By Transparent , 2 days ago
-
@editor Mars if you have any recommendations for down s...
By abam48 , 3 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness HI, The rules is a best practise, the ...
By ASHP-BOBBA , 3 days ago
-
RE: Getting the best out of a heat pump - is Homely a possible answer?
@cathoderay how did you get a script to run for that- d...
By benson , 3 days ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
@ashp-bobba thank you, and equally so, thank you for ta...
By Mars , 4 days ago
-
@judith good to know… I’ll continue to feed Wattson, an...
By Mars , 5 days ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
@editor great article re accreditation. I note ISO/IEC ...
By Bart , 5 days ago
-
RE: Who's your electricity provider and what's your tariff?
I don't (yet), but my PW3 is due to be installed shortl...
By Old_Scientist , 6 days ago
-
RE: MCS and NAPIT complaints process
@chrislay, is your heat pump complaint still unresolved...
By Mars , 6 days ago
-
RE: ASHP Install from hell - help please
@saf1973 I’ve been going through old cases on the forum...
By Mars , 6 days ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@aaron There's the rub, the database does not list my ...
By AF1 , 7 days ago