Forums

Forums
Renewable Heating
Air Source Heat Pum...
New 12kW Samsung he...
 
Notifications
Clear all

New 12kW Samsung heat pump

 
Page 3 / 3
Air Source Heat Pumps (ASHPs)
Last Post by Dunlorn 3 years ago
31 Posts
9 Users
14 Reactions
9,242 Views
RSS
 Kev M
(@kev-m)
Famed Member Member
Joined: 5 years ago
Posts: 1276
16/01/2022 10:58 am  
Posted by: @rsk14

Finally (fingers crossed) getting our MMSP monitor fitted tomorrow, is there anything I should know or ask about this? Thanks - still trying to get my head around all this. 

I'm still waiting for mine to be fixed after it was installed months ago.  Make sure you get to see it working; something I didn't do.  And you'll need the right documentation to be able to claim the extra RHI so make sure you get that.  



   
👍
2
ReplyQuote
 rsk14
(@rsk14)
Eminent Member Member
Joined: 4 years ago
Posts: 11
Topic starter 16/01/2022 11:09 am  
Posted by: @kev-m
Posted by: @rsk14

Finally (fingers crossed) getting our MMSP monitor fitted tomorrow, is there anything I should know or ask about this? Thanks - still trying to get my head around all this. 

I'm still waiting for mine to be fixed after it was installed months ago.  Make sure you get to see it working; something I didn't do.  And you'll need the right documentation to be able to claim the extra RHI so make sure you get that.  

Thank you will do. 



   
ReplyQuote
 Derek M
(@derek-m)
Illustrious Member Member
Joined: 5 years ago
Posts: 4427
17/01/2022 2:09 pm  
Posted by: @rsk14

Finally (fingers crossed) getting our MMSP monitor fitted tomorrow, is there anything I should know or ask about this? Thanks - still trying to get my head around all this. 

Hi rsk14,

For accurate temperature measurement the temperature sensors need to be mounted in pockets (thermowells). Ensure that the arrow on the flow meter is pointing in the direction of the water flow. Ensure that the electricity meters and heat meter are connected correctly to the heat pump controller and that the pulse rates are correctly set.



   
👍
2
ReplyQuote
 witchcraft
(@witchcraft)
Reputable Member Contributor
Joined: 4 years ago
Posts: 91
18/01/2022 2:48 pm  

@kev-m Same here, it should be sorted Thursday and I will want to see it working



   
ReplyQuote
 witchcraft
(@witchcraft)
Reputable Member Contributor
Joined: 4 years ago
Posts: 91
25/01/2022 4:14 pm  

Well they came and they cocked that up too.  No MMSP arrangement document,  no explanation (they just left site),  Passiveliving site is only reporting internal temperature, ASHP power draw and immersion heater usage.

Screenshot 2022 01 25 at 15.08.13

 Screen shot attached. I'm bloody livid!



   
ReplyQuote
 Sambag
(@sambag)
New Member Member
Joined: 3 years ago
Posts: 2
05/01/2023 7:24 pm  

I have a similar Samsung heat pump as is being discussed. The controller is the same as the instruction manual somebody posted earlier on in the thread. 

My question is, is there a way to set up the ASHP to a different water law during the day compared to the night? Or something similar. I basically want a law for the day while I’m at home, And I believe the heat pump would be best running all the time, however, it’s coldest at night and therefore radiators will be warmest and I wake up hot. I’d prefer it to be a stable rad temp at night that makes sure the house doesn’t drop too far and then apply the water law during the day. Is this possible without manually doing it every day? 



   
ReplyQuote



Dunlorn
 Dunlorn
(@dunlorn)
Estimable Member Member
Joined: 3 years ago
Posts: 79
06/01/2023 5:47 pm  

@sambag I have 2 x 12kW Samsungs and not aware of any means to change the weather compensation as you suggest, without regular manual intervention. Mine are "controlled" via a Hive thermostat that I programme for a constant 18°C during the day and set back to 16°C overnight (2300-0400). This means, except in very cold weather, they are mostly off overnight but the temperature doesn't drop so far that they have too much work to do in the morning. Not sure this is always an optimum arrangement, just what I'm trialling at the moment.


2 x 12kW Samsung Gen6 ASHP, 5.6kW solar PV ground mounted c/w 10kWh Puredrive battery & Solis inverter.


   
ReplyQuote
Page 3 / 3
Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →