Forums

Forums
Renewable Heating
Air Source Heat Pum...
LG Therma V. Softwa...
 
Notifications
Clear all

LG Therma V. Software upgrades, AI (weather compensation), SCOP

 
Air Source Heat Pumps (ASHPs)
Last Post by Tim441 2 years ago
3 Posts
2 Users
0 Reactions
2,333 Views
RSS
 Tim441
(@tim441)
Prominent Member Contributor
Joined: 3 years ago
Posts: 319
Topic starter 05/02/2024 8:58 am  

I wonder if @bobbt9866 or anyone else knows if its possible to upgrade controller software? My system was installed in 2020 with software v3.05.5a.

1. Is it possible to upgrade the software?
2. If not... can the entire controller be replaced to upgrade or are there other controls in the Therma V electronics that make that impractical? Perhaps impractical on cost grounds anyway?

I have setup AI myself with help of this forum and Facebook User Group. Seems to be generally working well now even though installer placed our controller in a warm bathroom which means we can only use Water (LWT) & outside temperature to control the AI.

1. Would it be worth moving the controller to living space to aid control? It would not be a huge job but not inclined to bother if the benefit is likely to be minimal.
2. With v3.05.5a there seems to be minimal (no?) information about efficiency, SCOP etc. Any suggestions for monitoring or extracting data? I don't know if Home Assistant, LG ThinQ or other kit is practical or worthwhile? and easy to setup for non-technical people?!

any comments or thoughts will be appreciated!


Listed Grade 2 building with large modern extension.
LG Therma V 16kw ASHP
Underfloor heating + Rads
8kw pv solar
3 x 8.2kw GivEnergy batteries
1 x GivEnergy Gen1 hybrid 5.0kw inverter
Manual changeover EPS
MG4 EV


   
Quote
Topic Tags
LG Therma weather compensation controller
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3404
07/02/2024 10:03 pm  

Hi Tim. Here's the feedback I got from Bob relating to your question:

The software can be updated through the remote control as it has a card that be removed and/or updated. This allows the service engineer to reset the system design settings on return to site. The details should be in the remote manual that comes with the unit.


Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
 Tim441
(@tim441)
Prominent Member Contributor
Joined: 3 years ago
Posts: 319
Topic starter 08/02/2024 8:49 am  

@editor my thanks to you and Bob for following up. The manuals make no mention of software or firmware upgrades. Also cannot find any reference to ability to update card.

MANUALSLIB.COM "https://www.manualslib.com/manual/1511067/Lg-Therma-V-Series.html?page=12#manual"
Remote Controller - LG Therma V series Owner's Manual [Page 12] | ManualsLib
LG Therma V series Manual Online: Remote Controller. Operation display window Back button Up/Down/Left/Right button Operation display window Back button Up/down/left/right button OK button On/Off button NOTE ! • Some functions may not be operated and displayed depending on the product...

i will continue to investigate and will report back if anything found.


Listed Grade 2 building with large modern extension.
LG Therma V 16kw ASHP
Underfloor heating + Rads
8kw pv solar
3 x 8.2kw GivEnergy batteries
1 x GivEnergy Gen1 hybrid 5.0kw inverter
Manual changeover EPS
MG4 EV


   
ReplyQuote



Forum Jump:
  Previous Topic
Next Topic  
Related Topics
Topic Tags:  LG Therma (3) , weather compensation (10) , controller (4) ,

Currently viewing this topic 1 guest.

Share:

Join Us!

Login   Register

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →