Forums

Forums
Renewable Heating
Air Source Heat Pum...
Ecodan - rubbish da...
 
Notifications
Clear all

Ecodan - rubbish data

 
Air Source Heat Pumps (ASHPs)
Last Post by Gfletcher 3 years ago
3 Posts
2 Users
1 Reactions
1,293 Views
RSS
 Gfletcher
(@gfletcher)
Trusted Member Member
Joined: 3 years ago
Posts: 24
Topic starter 18/02/2023 6:28 pm  

Hi,

I have an Ecodan 8.5kW ASHP - I have been logging data from the FT6 display (I don't have Melcloud) manually and keeping track of daily household energy use, and the information just doesn't seem to tally. I suppose I shouldn't mind so much, but I would like to understand more accurately how much electricity the unit is using. 

An example of the sort of data that is being generated - for January the FT6 is saying that the heatpump consumed 402kWh of electricity for both DHW and heating. The delivered energy was 902 giving a COP of 2.24. My total household energy use was 488kWh for January. Therefore if I take the consumption data that means that on average the heatpump was using 13kWh a day (not unreasonable) and the rest of the house was using 2.8kWh a day (4 bed house with 2 adults working from home and 2 teenagers). The total household energy use is correct - that is what I am billed! Pre-heatpump my average household energy use across the whole year was 5.6kWh a day. Is there anything I can do with my existing setup to improve the accuracy of reporting, or do I need to look at a 3rd party system to record actual use? Any pointers would be helpful.

Cheers

Gavin   


This topic was modified 3 years ago by Gfletcher

   
👍
1
Quote
 HarriUp
(@harriup)
Reputable Member Member
Joined: 4 years ago
Posts: 108
18/02/2023 7:38 pm  

Yep, the self-measurement of the Ecodans is highly inaccurate. For January mine gives me a consumed estimate of 687kWh against a metered value 631kWh.

If you want an accurate value you'll need a meter on the supply circuit. It will depend how much you are happy to intervene in the the wiring arrangements. A straight forward meter inserted into the supply circuit ( https://metersuk.co.uk/products/single-phase-electric-the-tiny/) will give you an accurate record but one that you will have to read yourself as and when. I have my circuit wired through an Eastron SDM120 meter mounted next to the consumer unit which then feeds a value into an OpenEnergyMonitor setup which records and displays the energy consumed via computer/phone. If you don't want to rewire the mains at all you could go with a CT clamp-based arrangement where a circular magnet is clamped around the live wire inside the consumer unit (eg https://metersuk.co.uk/products/single-phase-electric-meter/).


Mitsubishi EcoDan 8.5 kW ASHP - radiators on a single loop
210l Mitsubishi solar tank
Solar thermal
3.94kW of PV


   
ReplyQuote
 Gfletcher
(@gfletcher)
Trusted Member Member
Joined: 3 years ago
Posts: 24
Topic starter 19/02/2023 1:39 pm  

Thanks @HarriUp. I'll look into those, I have also been looking at the Open Energy Monitor.

Cheers

Gavin



   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  
Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →