Forums

Forums
Renewable Heating
Air Source Heat Pum...
Baxi Air Source Hea...
 
Notifications
Clear all

Baxi Air Source Heat Pump tips and tricks

 
Page 9 / 10
Air Source Heat Pumps (ASHPs)
Last Post by Broadsman 4 months ago
109 Posts
7 Users
54 Reactions
6,522 Views
RSS
 Cathyem1
(@cathyem1)
Estimable Member Member
Joined: 6 months ago
Posts: 59
Topic starter 08/03/2025 12:24 pm  

@cathoderay A Baxi engineer is coming out on Monday to fit our new control panel. Baxi have told me to contact them direct if I have any other issues and they've given me a number.

The installer is coming here on Thursday to sort out the glycol in our solar thermal water heating and get that back up and running again. 😁


   
ReplyQuote
cathodeRay
 cathodeRay
(@cathoderay)
Famed Member Moderator
Joined: 3 years ago
Posts: 2083
08/03/2025 12:58 pm  

@cathyem1 - thanks for the update. Let us know how it goes on Monday!

Midea 14kW (for now...) ASHP heating both building and DHW


   
ReplyQuote
 Cathyem1
(@cathyem1)
Estimable Member Member
Joined: 6 months ago
Posts: 59
Topic starter 11/03/2025 5:38 pm  

@cathoderay Ok, that's odd. The Baxi chap came yesterday and replaced the defective control panel and it's still gaining time and the date isn't changing. Called Baxi again today and one of their technical people(?) is coming out on Friday to see if the ASHP is causing the clock to gain.

Also I've just checked the screens you got me to check previously. We’re still on curve 9, but the settings have changed.

Here are the new settings. I would appreciate your comments @cathoderay 

 

IMG 0082
IMG 0081
This post was modified 5 months ago 2 times by Cathyem1

   
ReplyQuote



cathodeRay
 cathodeRay
(@cathoderay)
Famed Member Moderator
Joined: 3 years ago
Posts: 2083
11/03/2025 6:31 pm  

Posted by: @cathyem1
↑

We’re still on curve 9, but the settings have changed.

It may be be because the controller has been changed, and has gone to some albeit rather odd defaults. See if you can set them to what you had before.

The fact the clock is still playing up seems to suggest something is still wrong. Roll on Friday...

Midea 14kW (for now...) ASHP heating both building and DHW


   
ReplyQuote
Transparent
 Transparent
(@transparent)
Illustrious Member Moderator
Joined: 4 years ago
Posts: 2437
11/03/2025 8:15 pm  

Posted by: @cathoderay
↑

Roll on Friday...

Since the clock is gaining, by the time Baxi's techie arrives it'll be the weekend...
... and he'll be earning overtime. 🤨 

Save energy... recycle electrons!


   
😂
1
ReplyQuote
 Cathyem1
(@cathyem1)
Estimable Member Member
Joined: 6 months ago
Posts: 59
Topic starter 11/03/2025 9:21 pm  

@cathoderay thank you, I will.


   
ReplyQuote
 SteveL
(@stevel)
New Member Member
Joined: 4 months ago
Posts: 2
12/03/2025 5:31 pm  

@cathyem1 

new user here.

i had a Baxi heat pump installed last week under the HUG scheme. My installer also left my controller set at 2016! I followed the advice here to set time and date today.

i have the user handbook but it’s not written for a new user really.

 

i had no choice over the installers as it was grant funded and it wasn’t the best experience, but I do have a warm house and hot water. I’ve experimented today by lowering the hot water to 45. It was set at 55.  I also have an immersion timer they fitted. It’s set to heat for one hour early morning on cheap rate. They also fitted a Hive control and 6 solar panels. Lots for me to learn about!


   
👍
3
ReplyQuote
 Cathyem1
(@cathyem1)
Estimable Member Member
Joined: 6 months ago
Posts: 59
Topic starter 13/03/2025 12:02 pm  

@stevel Hi, welcome to the Baxi gang 😉

Our installer came out today to sort out our solar thermal water heating system. His company - Sustain Homes who installed the ASHP have taken over the servicing for the solar thermal.

He also insulated some paperwork that the original chaps had missed.

It’s definitely a learning curve with the ASHP, but I’m glad we did it. The Baxi user guide is complicated, but then it’s probably because the original units are Midea apparently.

There are real experts on here, so any questions you have will be answered.

I’m thinking about solar panels and batteries, but I don’t think we could get any grants etc. My husband and I are just over the financial threshold for anything unfortunately.


   
ReplyQuote
 Cathyem1
(@cathyem1)
Estimable Member Member
Joined: 6 months ago
Posts: 59
Topic starter 13/03/2025 12:05 pm  

@transparent Good morning,

the installer sorted our missing inside insulation. See pics.

We organised our own outside, which is held on with string if anyone needs to get to the bolts etc.

IMG 3773
IMG 3772

 


   
👍
1
ReplyQuote



 SteveL
(@stevel)
New Member Member
Joined: 4 months ago
Posts: 2
30/03/2025 6:53 am  

@cathoderay I had to return to this post today as my Baxi controller did not move forward to BST! The immersion timer did though.


   
ReplyQuote
cathodeRay
 cathodeRay
(@cathoderay)
Famed Member Moderator
Joined: 3 years ago
Posts: 2083
30/03/2025 8:33 am  

@stevel - my Midea wired controller is the same, I have to manually change between GMT and BST. To be fair to Midea, other clocks in the house eg oven and microwave also need manual changing, as indeed do I myself, and it still takes me a couple of days to adjust!

Midea 14kW (for now...) ASHP heating both building and DHW


   
👍
😂
2
ReplyQuote
Transparent
 Transparent
(@transparent)
Illustrious Member Moderator
Joined: 4 years ago
Posts: 2437
30/03/2025 12:51 pm  

'ere in the West Country we're worried 'bout what 'appens at eight minutes to six.

'parrently there's a date change at 1752.

Denzil 'erd landlord at Nags 'Ed sez dem Parlyment jobbies - thems stole eleven dayz of 'is life!
Theivin' B*****rds.

This post was modified 4 months ago 2 times by Transparent

Save energy... recycle electrons!


   
ReplyQuote
Page 9 / 10
Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts

Members Online